beautypg.com

Samsung PS51D8000FS User Manual

Page 12

background image

English - 12

Connecting to a COMMON INTERFACE slot

Attaching the CI Card Adapter

Attach the adapter as shown below.
To connect the CI CARD Adapter, follow these steps.

We recommend attaching the adapter before installing
the wall mount, or inserting the “CI or CI+ CARD”.

1. Insert the CI CARD Adapter into the two holes on the

product 1.

Please find a two holes on the rear of the TV. A two
holes is beside the

COMMON INTERFACE

port.

2. Connect the CI CARD Adapter into the

COMMON

INTERFACE

port on the product 2.

3. Insert the “CI or CI+ CARD”.

We recommand that you insert the CI card before you mount the TV on a wall.
It may be difficult to insert after the mounting.
Insert the card after attaching the CI-Adapter on TV.
It is difficult to attach the module if you insert the card before attaching.

Using the “CI or CI+ CARD”

To watch paid channels, the “CI or CI+ CARD” must be inserted.

• If you don’t insert the “CI or CI+ CARD”, some channels will display

the message “Scrambled Signal”.

• The pairing information containing a telephone number, the “CI or CI+

CARD” ID the Host ID and other information will be displayed in about
2~3 minutes. If an error message is displayed, please contact your
service provider.

• When the configuration of channel information has finished, the

message “Updating Completed” is displayed, indicating the channel
list is updated.

NOTE

x

You must obtain a “CI or CI+ CARD” from a local cable service provider.

x

When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+
CARD” may cause damage to it.

x

Insert the “CI or CI+ CARD” in the direction marked on the card.

x

The location of the

COMMON INTERFACE

slot may be different depending on the model.

x

“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.

x

If you have any problems, please contact a service provider.

x

Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or
will not be seen.

TV Rear

[PD8000-XC]BN68-03451A-00L04.indb 12

2011-03-08 오후 4:12:02

This manual is related to the following products: