Electrical service specifications (per dryer) – American Dryer Corp. Extended Side Panels AD-120ES III User Manual
Page 27
23
2. Electrical Service Specifications
* AWG Stranded Type Wire...size wire as per National Electrical Code or local codes.
** 380, 400, and 416 volt dryers are built 4-wire only. Customer must contact factory to special order 3-wire systems.
IMPORTANT: The dryer must be connected to the electric supply shown on the data label that is
affixed to the left side panel/wall area behind the control door. In the case of 208
VAC or 240 VAC, the supply voltage must match the electric service specifications of
the data label exactly.
WARNING: 208 VAC AND 240 VAC ARE NOT THE SAME. Any damage done to dryer
components due to improper voltage connections will automatically VOID THE
WARRANTY.
NOTE: ADC reserves the right to make changes in specifications at any time without notice or
obligation.
ADG-120ES III Reversing, 3ø (GAS)
ADS-120ES III Reversing, 3ø (STEAM )
ELECTRICAL SERVICE SPECIFICATIONS (PER DRYER)
IMPORTANT: 208 VAC AND 240 VAC ARE NOT THE SAME. When ordering, specify exact voltage.
NOTES: A. When fuses are used they must be dual element, time delay, current limiting, class RK1 or RK5
ONLY. Calculate/determine correct fuse valve, by applying either local and/or National Electrical
Codes to listed appliance amp draw data.
B. Circuit breakers are thermal-magnetic (industrial) motor curve type ONLY. For others,
calculate/verify correct breaker size according to appliance amp draw rating and type of breaker
used.
C. Circuit breakers for 3-phase (3ø) dryers must be 3-pole type.
SERVICE
VOLTAGE
PHASE
WIRE
SERVICE
APPROX.
AMP DRAW
MINIMUM
WIRE SIZE
FUSING
CIRCUIT
BREAKER
Dual Element
Time Delay
60 Hz
50 Hz
60 Hz
50 Hz
60 Hz
50 Hz
208
3ш
3
14.5
---
*
20
---
20
---
240
3ш
3
14.6
17.4
*
20
25
20
25
380-400
3ш
4**
---
8.7
*
15
---
15
---
416
3ш
4**
---
8.4
*
15
---
15
---
460/480
3ш
3
7.8
---
*
15
---
15
---
575
3ш
3
5.8
---
*
15
---
15
---
051303