Getting started – Samsung LE46D679M3S User Manual
Page 6
6
Getting Started
English
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the mains and antenna.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the red button.
1
Selecting a language
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select the desired OSD (On Screen Display) language.
SMART
HUB
2
Selecting Store Demo or
Home Use
Press the
◄ or ► button, then press the
ENTER
E button.
y
Select the Home Use mode. Store Demo Mode is for retail environments.
y
Return the unit’s settings from Store Demo to Home Use (standard): Press the
volume button on the TV. When the OSD volume is displayed, press and hold
MENU
for 5 sec.
3
Selecting a country
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select the appropriate country.
✎
After selecting the country in the Country menu, some models may proceed with an additional
option to setup the pin number.
✎
When you input the PIN number, 0-0-0-0 is not available.
4
Selecting an antenna
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select Air, Cable or Satellite.
5
Selecting a channel
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select the channel source to memorise. When setting the antenna source to Cable, a step appears
allowing you to assign numerical values (channel frequencies) to the channels.
For more information, refer to Channel
→ Auto Store (P. 12).
✎
Press the
ENTER
E button at any time to interrupt the memorization process.
✎
When setting the antenna source to Satellite, refer to page 12.
6
Setting the Clock Mode
Set the Clock Mode automatically or manually.
Press the
▲ or ▼ button to select Auto, then press the
ENTER
E button.
7
Viewing the HD
Connection Guide.
The connection method for the best HD screen quality is displayed.
8
Enjoy your TV.
Press the
ENTER
E button.
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to
change the PIN number, use the Change PIN function.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets
the PIN to “0-0-0-0” :
MUTE
→ 8 → 2 → 4 →
POWER
(on)
Power Input
VHF/UHF Antenna
Cable
R-AUDIO-L
P
R
P
B
Y
ANT OUT
or
[LD679-ZG]BN68-03378A-L04.indb 6
2011-04-12 �� 10:22:53