Automatic switch-off, Brightness of the display – AEG BS7304001 User Manual
Page 22

Indicator of the setting menu
Description
Value to set
SET3
KEY TONE
CLIC/BEEP/OFF
SET4
FAULTY TONE
ON/OFF
SET5
SERVICE MENU
ON/OFF
SET6
RESTORE SETTINGS
YES/NO
SET7
1)
TIME EXTENSION
ON/OFF
1) Selected models only
You can set the settings menu only when the appliance is off.
Activate the Settings menu:
1.
If necessary, deactivate the appliance .
2.
Touch and hold for three seconds.
The display shows "SET1" and "1" flashes.
3.
Touch
/
to set the setting.
4.
Touch
.
5.
Touch
/
to change the value of the setting.
6.
Touch
.
Automatic switch-off
For safety reasons the appliance deactivates automatically after some time:
• if an oven function operates.
• if you do not change the oven temperature.
Oven temperature
Switch-off time
30 °C -120 °C
12.5 h.
120 °C - 200 °C
8.5 h.
200 °C -230 °C
5.5 h.
After an automatic switch-off, touch a sensor field to operate the appliance again.
The Automatic switch-off works with all oven functions, apart from Light, Low temperature
cooking, Core temperature sensor, Duration, End, Time delay.
Brightness of the display
There are two modes of display's brightness:
• Night brightness - when the appliance is off, the brightness of the display is lower be-
tween 22:00 and 06:00;
• Day brightness:
– when the appliance is on;
– if you touch any of the sensor fields during night brightness (apart from ON/OFF), the
display goes back to day brightness mode for next 10 seconds;
22
Additional functions