Samsung UE32ES6200S - Manual (Page 9)

English
7
Auto Tuning (2):
(Depending on the
country) Selecting a
search options Select the channel source to memorise. When setting the aerial source to
Cable, a step appears allowing you to assign numerical values (channel
frequencies) to the channels. For more information, refer to Auto Tuning
(Channel Menu
→ Memorizing Channels) in the e-Manual.
✎ When Air or Cable is selected first: After all Air or Cable channels
are stored, the step for storing Satellite channels is displayed.
✎ When Satellite is selected first: After all Satellite channels are
stored, the step for storing Air or Cable channels is displayed.
✎ Select Stop at any time to interrupt the memorization process.
8
Clock: Setting the
Clock Mode • Auto: Set the current time automatically.
• Manual: Allows you to manually set the current date and time.
9
Setup Complete Select Close to finish.
✎ The completed settings are displayed.
If You Want to Reset This Feature...
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”.
If you want to change the PIN number, use the Change PIN function.
You should do Setup (Menu
→ System) again at home although you did in shop.
✎ If you forget the PIN code, press the remote control buttons in the following sequence in Standby
mode, which resets the PIN to “0-0-0-0”:
MUTE → 8 → 2 → 4 → POWER (on).
English - 9
[UE6200-ZG]BN68-04494D-01L04.indb 9 2012-08-03 �� 3:30:46