Alpine SWD-1600 - Manual (Page 10)

EN
• Make all connections securely.
• Any unused connections should be insulated with electrical insulation tape.
Memo
• On cars fitted with computers and other such devices (e.g. head units with
security code), you may loose the memory when disconnecting the negative lead.
• This product cannot be used with cars fitted with a common negative speaker system.
•To prevent external noise from entering the audio system:
• Locate the unit and route the leads at least 10 cm away from the car harness.
• Keep the battery power leads as far away from other leads as possible.
• Connect the ground lead securely and safely to a bare metal spot (remove the coating if
necessary) of the car chassis.
• If you add an optional noise suppressor, connect it as far away from the unit as possible. Your
Alpine Dealer carries various Alpine noise suppressors, contact them for further information.
• Your Alpine Dealer knows best about noise prevention measures so consult your dealer for
further information.
EN