Nilfisk-ALTO 3DS - Manual (Page 5)

AMERICAN SANDERS TECHNOLOGY Operator’s Manual - 3DS Page 5
Introduction & Machine Specifications
The 3DS is a machine designed primarily for fine finish sanding of hardwood floors. The finish sanding process results
in a smoother and flatter floor and assists in removing imperfections created during the drum or belt sanding process.
This machine can not be used on wet surfaces.
PRODUCT SPECIFICATIONS
Machine Type:
Motor:
Voltage:
Frequency:
Current:
Fuse:
Insulation Class:
Sanding Pad Diameter:
Speed of Sanding Pad: (rpm)
Speed of Sanding
Gear Housing: (rpm)
Weight of Sanding Unit:
Weight of Chassis:
Total Weight (w/o vacuum):
Total Weight (with vacuum):
Length:
Width:
Height (assembled):
Filter dimension (cloth):
Filter dimension (paper):
Filtration (cloth):
Filtration (paper):
Shipping Weight w/vacuum):
Shipping Weight w/o vacuum):
Noise Emission
(with vacuum unrestricted):
Noise Emission
(w/o vacuum unrestricted):
Working Diameter:
Power Cable
Rubber Jacketed 3 Disc Dry Sanding
3 HP Single Phase
230 Volt
60 Hz 50Hz
11.5 Amps
15 Amps
F
8” 20.32cm
717 (Loaded)
170 (Loaded)
109 lbs. (49.44 kg.)
37 lbs.(16.78 kg.)
146 lbs.(66.36 kg.)
163 lbs.(74.09 kg.)
35” 88 cm
20” 51 cm
39.5” 100 cm
950 sq. cm.
5310 sq. cm.
15 microns
12 microns
234 lbs. 106 kg
212 lbs. 96 kg
76 dBA
73 dBA
18.75” 48 cm
40’ 12-3 Cord 15 meters
Machine Code 07082C 07085C