Advanced features, Network setup (ad-hoc), Network setup (manual) – Samsung LE40C670M1Q User Manual

Page 28

English

Advanced Features

3. Press the

▲ button to go to Select a Network, and

then press the

ENTER

E button. The Network function

searches for available wireless networks. When done, it
displays a list of the available networks.

4. In the list of networks, press the

▲ or ▼ button to select

a network, and then press the

ENTER

E button.

If the AP is set to Hidden (Invisible), you have

✎

to select Add Network and enter the correct
Network Name (SSID) and Security Key to
establish the connection.

5. If the Security/PIN pop-up appears, go to Step 6. If the

Network Connecting Screen appears, go to Step 10.

6. Press the

▲ or ▼ button to select Security or PIN. For

most home networks, you would select Security (for
Security Key). The Security Screen appears.

0~9

B
C

Network Setup

U Move E Enter R return

Secunity Key

0 entered

Number

Lower case
Delete
Space

7. On the Security screen, enter your network’s Pass

Phrase.

You should be able to find the Pass Phrase on

✎

one of the set up screens you used to set up your
router or modem.

8. To enter the Pass Phrase, follow these general directions:

– Press the number buttons on your remote to enter

numbers.

– Use the direction buttons on your remote to move

from button to button on the Security Key screen.

– Press the Red button to change case or display

symbols/characters.

– To a enter letter or symbol, move to the letter or

symbol, and then press the

ENTER

E button.

– To delete the last letter or number you entered, press

the Green button on your remote.

9. When done, press the Blue button on your remote. The

Network Connecting screen appears.

10. Wait until the connection confirmation message is

displayed, and then press the

ENTER

E button. The

Network Setup screen re-appears.

11. To test the connection, press the

RETURN

button to

select Network Test, and then press the

ENTER

button.

Network Setup (Ad-Hoc)

You can connect to a mobile device without an access point
through the “Samsung Wireless LAN Adapter” by using a
peer to peer network.

This function is available when

✎

SWL(Samsung

Wireless Link) is set to Off.

How to connect to new Ad-hoc
1. Follow Steps 1 through 6 in the “How to set up using

PBC (WPS)”. (P. 27)

2. Choose Select a network. A list of devices/networks

appears.

3. While in the device list, press the Blue button on the

remote.

The message

✎

Ad-hoc is a direct WI-Fi

connection with cellphone or PC. The existing
network system may have limited functionality.
Do you want to change the network
connection? is displayed.

4. Input the generated Network Name (SSID) and

Security Key into the device you want to connect.

How to connect an existing Ad-hoc device
1. Follow Steps 1 through 6 in the “How to set up using

PBC (WPS)”. (P. 27)

2. Choose Select a network. Then, the device list will be

displayed.

3. Select the device you want in the Device list.
4. If security key was applied, input the security key.

If network does not operate normally, check

✎

the Network Name (SSID) and Security Key
again. An incorrect Security Key may cause a
malfunction.

Network Setup (Manual)

If the other methods do not work, you need to enter the
Network setting values manually.

Getting the Network Connection Values
To get the Network setting values on most Windows
computers, follow these steps:
1. Right click the Network icon on the bottom right of the

screen.

2. In the pop-up menu, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support tab, click the Details button. The

Network settings are displayed.

BN68-02631A_Eng.indb 28

2010-03-04 �� 10:49:58