Adaptec AVC-2210 User Manual
Page 17
9
Installing the Drivers
6
Click Yes to restart your computer.
Note:
If you plug your AVC-2210 into a USB 1.1 port, this
message appears during driver installation:
A hi-speed USB device is plugged into a non-hi-speed USB hub.
This message indicates that your AVC-2210 will run at a
reduced (USB 1.1) speed. To ensure maximum
performance, plug your AVC-2210 into a USB 2.0 port.
(For information on USB 2.0 adapters and hubs, go to the
Adaptec Web site at
www.adaptec.com
.)
Note:
To check if the driver is installed properly, you can