Samsung SCH-A530ZSVXAR - Manual (Page 34)

22
Calls
Outgoing
To place a call press to power on your phone. The phone first shows an
animated sequence and the icons discussed earlier display, this indicates your
phone is on. (No dial tone will be heard). This is called standby mode.
1. Enter the phone number you want to call (up to 32 digits), by pressing
the numeric keys. The phone numbers display from left to right.
2. Press to place a call to the entered phone number.
Incoming
Your phone signals an incoming call or message in the following
ways:
•An animation message
•The backlight illuminates
•The red LED indicator flashes
•The ringer sounds (unless you have set the ringer to
vibrate or off)
Incoming call notification continues until one of the following events
occurs:
•You answer the call
•The calling party ends the call
•The call is sent to voicemail
Your phone provides the following voice call notification features:
•Nine ring volume settings including 1- beep, vibrate,
vib+ring, or silent.
•Five ring types and Ten melody tones
•Name display with Caller ID. (If the caller’s name is
programmed into your Phone Book.)
•Automatic storage of an incoming call’s information to a call log.
(The last 20 calls you answered are stored in an Incoming call log