Samsung PN50C675G6FXZA User Manual

Quick setup guide, Step 4, Step 5

Quick Setup Guide

Congratulations on the purchase of your new Samsung TV.
Read this setup guide to get your TV up and running quickly.

1-800-SAMSUNG (1-800-726-7864)
Samsung Electronics America, Inc.
85 Challenger Road Ridgefield Park, NJ 07660-2112
Samsung Electronics Canada Inc.
55 Standish Court Mississauga, Ontario L5R 4B2
Call Center hours of operation: Mon-Sun, 9:00 AM -12
AM EST.
To register this product, visit: www.samsung.com/
register.

STOP

Please do not return this unit.

If you have problems operating your

TV, call:

1-800-SAMSUNG (1-800-726-7864)

For web support please visit:

www.samsung.com/support

Step 4

: Connect External Devices

Connecting an AV device (DVD/Blu-ray player, cable/satellite box, etc.)

Use one of the connections below to connect your TV to an external A/V device. We recommend using HDMI for the highest picture quality.

Connecting an audio device (Home Theater, etc.)

Connect your TV to your Home Theater or other audio device to enjoy enhanced
Sound quality.

Connecting a PC

Connect your TV to a PC to use it as a Monitor.

U Move E Enter

Select Language of the OSD.

Menu Language

Plug & Play

English

Español
Français

Step 5

: Run Plug & Play

When you turn on your TV for the first time, it automatically launches the Plug &
Play function. With Plug & Play, you can select the On Screen Display language,
set the clock mode, and launch the TV’s channel memorizing process.
It also displays connection instructions similar to those in this guide.
To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow
buttons on your remote. To make a selection, press the

ENTER

E button.

To skip a screen, press the

button. To turn on your TV, press the

POWER

button on the remote or on the TV. To run Plug & Play, follow these steps:

Using your remote control,
select the language for the On
Screen Display (OSD), and then
press the

ENTER

E button.

Select Home Use, and then
press the

ENTER

E button. If you select Store Demo, the TV will reset your

picture and audio settings every 30 minutes.

Select Antenna Source and Channel Source. If Antenna Source is
Cable or Auto, you must select Channel Source to same type as your
cable system type. After selecting source, select Search; then press the

ENTER

E button on your remote.

✎

Most cable systems are Standard(STD) systems, If you are not sure
about what kind of cable system you have, contact your cable company.

✎

If your TV is attached to a cable or satellite box, skip Steps 3 through 5.
After Plug & Play is complete, set your TV to Channel 3 or 4, according
to the directions for your cable or satellite box.

The TV memorizes the available channels. This process can take up to 45
minutes.

After the TV has memorized the channels, choose the Clock Mode. Select
Auto if you have a digital channel in your area. Select Manual if you don’t, or
if you have a cable or satellite box. When done, press the

ENTER

E button.

✎

If you select Manual, the clock setting screen appears.

Select the daylight savings time setting: Off or On, and then press the

ENTER

E button

Select the time zone in which you live, and then press

ENTER

E button.

After the time zone screen, The connection method for best HD screen
quality is displayed. Press Right arrow button on your remote to view each
screen in succession. Press the Blue button to skip this section.

The Enjoy your TV. screen appears. Then press the

ENTER

E button.

Changing the Screen Size

Your TV has several screen size options, each designed to work best with specific
types of video input. If you have a cable box or satellite receiver, it may have its own
set of screen sizes as well.
To change the screen size, press the

P.SIZE

button on your remote. The first time

you press it, your TV displays the current setting. Thereafter, each time you press
the

P.SIZE

button, you change the size of the picture on the screen.

The following sizes are available:

16:9 Wide screen

4:3 Standard screen

Wide Fit

Zoom 1

Zoom 2

Screen Fit

✎

Screen Fit: Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.

Changing the Picture Mode

Your TV has four preset Picture Modes with factory adjusted settings, each
designed to give you an excellent picture under specific conditions.
To change the Picture mode, press the

P.MODE

button on your remote. The first

time you press it, your TV displays the current setting. Thereafter, each time you
press the

P.MODE

button, you change the mode of the picture on the screen.

The Picture Modes are listed and described in the table below:

Mode

Description

Dynamic

Brightens picture. For a vibrant, enhanced image in brightly lit or
sunny room.

Standard

For a bright, detailed picture in a normally lit room.

Movie

For a studio quality cinema picture in a dimly lit or dark room.

To change the Picture Mode, follow these steps:
1. Turn on your TV, press the

TOOLS

button on your remote.

The Tools menu appears.

2. Using the

▲ or ▼ on your remote, select Picture mode.

3. On the Picture mode menu, use the

◄ or ► on your remote to select the

Picture mode you want.

4. Press the

EXIT

button to exit the menu.

Setting the Clock

Before you can use your TV’s On/Off Timer, you must set the clock. To set the
clock, follow these steps:
1. Turn on your TV, press the

button on your remote, then select Setup

→

Time.

2. Select Clock Mode, and then press the

ENTER

E button.

3. Choose Auto or Manual.

If you select Auto, the current time will be set automatically using the time
from a digital channel.

If you select Manual, you can set the Month, Day, Year, Hour, Minute
and am/pm directly by pressing up, down, left and right arrow button on
your remote.

4. Press the

RETURN

button on your remote when done.

AUDIO IN

OPTICAL

Analog Audio connection

Digital Audio connection

Amplifier / DVD

home theater

Using an Audio Cable

Using an Optical Cable

Digital Audio System

Audio Cable

(Not Supplied)

Optical Cable (Not Supplied)

DVI OUT

AUDIO OUT

PC OUT

HD connection

Using a DVI to HDMI Cable

Using an D-Sub Cable

Audio Cable (Not Supplied)

HDMI to DVI Cable (Not Supplied)

D-Sub Cable

(Not Supplied)

Audio Cable (Not Supplied)

✎

When connecting to

AV IN 1

on the back of your TV, attach the

video cable (yellow) to the green jack next to the

AV IN 1

label.

The jack will not match the color of the video cable (yellow).

Component Cable

(Not Supplied)

HDMI OUT

AUDIO OUT

DVI OUT

AUDIO OUT

VIDEO OUT

AUDIO OUT

COMPONENT OUT

Best Connection

HD connection (up to 1080p)

Using an HDMI Cable

DVD

Using an HDMI to DVI Cable

HD connection (up to 1080p)

Very Good Connection

Device

Using a Component Cable

Good Connection

Component connection (up to 1080p)

Blu-ray player

Lowest Quality Connection

Using an Audio/Video Cable

Audio/Video connection (480i only)

Device

Audio Cable

(Not Supplied)

HDMI to DVI Cable

(Not Supplied)

Audio Cable

(Not Supplied)

Audio Cable

(Not Supplied)

HDMI Cable (Not Supplied)

Video Cable (Not Supplied)

DVD / Blu-ray player / HD Cable

Box / HD STB (Set-Top-Box)

satellite receiver

DVD / Blu-ray player / HD Cable Box / HD
Satellite receiver (STB)

DVD, Blu-ray player, cable box,

STB satellite receiver, VCR

Step 1

: Install the Stand

Follow the steps below to connect the TV to the stand.

✎

NOTE

Make sure to distinguish between the front and back of the Stand and
Guide Stand when assembling them.

Make sure that at least two persons lift and move the PDP TV.

Stand the product up fasten the screws. If you fasten the screws with the
with the PDP TV placed down, it may lean to one side.

Connect the Guide Stand to the
Stand using four screws (M4 X L10)
as shown.

With your TV upright, connect the
TV to the Stand.

Fasten two screws (M4 X L12) at
position 1, and then fasten the
two screws (M4 X L12) at position
2

Step 2

: Install the Batteries into the Remote

To install batteries into your remote
control, follow these steps:
1. Lift the cover on the back of the

remote upward as shown in the figure
to the right.

2. Install two AAA batteries.

✎

Make sure to match the + and -
ends of the batteries to the diagram in the battery compartment.

3. Replace the cover.

Step 3

: Connect Power and Antenna or Cable

VHF/UHF Antenna

Connect Ant In to

• Wall cable jack
• VHF/UHF Antenna
• Cable or Satellite box

Ant or Cable Out

Make sure the AC power cord is plugged in securely to
the wall outlet and the TV.

Use a 75 ohm (round) cable.

Top view

Front

Rear

Screws (M4 X L12)

Guide Stand

Stand

[QSG]BN68-03212A-00Eng.indd 1

2010-09-06 오후 3:40:08