Show server snmp command, Show user command, Show server snmp command show user command – Avocent CPS810 User Manual
Page 81
Chapter 5: CPS Appliance Commands 67
Show Server SNMP command
The Show Server SNMP command displays SNMP configuration information.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax
SHOW SERVER SNMP
Show User command
The Show User command displays information about one or all users.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax
SHOW USER [<username>|ALL]
Table 5.31: Show Server Security Command Display Fields
Field
Contents
Authentication
Configured authentication method(s). This includes the SSH authentication method
configured with the Server SSH command (or the default value), regardless of
whether SSH is enabled.
Encryption
Configured connection methods: None, SSH or both.
Lockout
Configured security lock-out state (Enabled or Disabled). If Enabled, the number of
hours in the lock-out period is included.
DS Server IP #0
IP address of DSView software server number 0.
DS Server IP #1
IP address of DSView software server number 1.
DS Server IP #2
IP address of DSView software server number 2.
DS Server IP #3
IP address of DSView software server number 3.
Preauth Certs
Preauthentication certificates.
Fingerprint (Hex)
SSH key MD5 hash.
Fingerprint (BB)
SSH key bubble babble.
Ping Reply
Configured ping setting (Enabled or Disabled).