Samsung WF419AAU-XAA - Manual (Page 26)

26_ troubleshooting
3E
Motor problem. Restart the cycle.
If the code reappears, call for service.
2E
High/Low voltage detected. Restart the cycle.
If the code reappears, call for service.
7E Ag+ Kit problem Call for service
AE
Communication error between
SUB PBA and MAIN PBA Call for service
SF1
SF2
SF3 System error Call for service
SUdS
Too many suds are detected
during the washing session.
The unit is put on hold until the
suds are reduced. Then, the unit
will go back to the operation.
When it finishes washing, End and
SUdS codes will blink in turn. To prevent it, cut down on detergents.
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
troubleshooting
BEST-WF419AAW-02657A_EN.indd 26 2009-02-18 ¿АИД 3:26:51