To select the source, To edit the input source name, Picture control – Samsung TXT2082X-XAA User Manual

Page 12: Using automatic picture settings

English - 11

To Select the Source

Use to select TV or other external input sources such as DVD players, VCRs, etc. connected

to the TV.
1 Press the MENU button to display the menu.

Press the

ENTER button to select Input.

2 Press the ENTER button to select Source List.

Press the ▲ or ▼ button to select signal source, then press the

ENTER button.

➢

You can choose between the following sets of jacks:

TV, AV, or Component on the

TV’s rear panel and

AV on the TV’s side panel.

Press the

SOURCE button on the remote control to view an external signal source.



In TV(Analog) mode:

TV → AV → Component



In DTV(Digital) mode:

DTV → AV→ Component

➢

To check the input signals displayed, press the

INFO button on the remote control.

To Edit the Input Source Name

Name the external device connected to the input jacks to make your input source selection

easier.
1 Press the MENU button to display the menu.

Press the

ENTER button to select Input. Press the ▲ or ▼ button to select Edit Name, then

press the

ENTER button.

2 Press the ▲ or ▼ button to select AV or Component input jack, then press the ENTER

button.

3 Press the ▲ or ▼ button to select VCR, DVD, Cable STB, Sat. STB, AV Recv., DVD Recv.,

Game, Camcorder, or DVD Combo input source, then press the ENTER button.

Press the

EXIT button to exit.

Using Automatic Picture Settings

Your TV has four automatic picture settings (“Dynamic”, “Standard”, “Movie”, “Custom”)

that are preset at the factory.

You can activate a Picture Setting by making a selection from the menu.
1 Press the MENU button to display the menu.

Press the ▲ or ▼ button to select

Picture, then press the ENTER button.

2 Press the ENTER button to select Mode.

Press the

ENTER button again. Press the ▲ or ▼ button to select the Dynamic, Standard,

Movie, or Custom picture setting, then press the ENTER button.



Choose

Dynamic for viewing the TV during the day or when there is bright light in the

room.



Choose

Standard for general TV watching mode.



Choose

Movie when watching movies.



Choose

Custom if you want to adjust the settings according to personal preference.

Press the

P.MODE button on the remote control to select one of the standard picture

settings.

Continued...

Picture Control

Move

Enter

Return

Source List

DTV

- - - -

Component - - - -

Move

Enter

Return

Mode

: Dynamic

Contrast

100

Brightness

Sharpness

Color

Tint

: G 50 R 50

Color Tone

: Cool1

Reset

Dynamic

Standard

Movie

Custom

Move

Enter

Return

Edit Name

- - - -

Component : - - - -

----

VCR

DVD

Cable STB

Sat. STB

AV Recv.

DVD Recv.

Game

Camcorder

DVD Combo

AA68-03783H-00Eng.indd 11

2007-06-04 ｿﾀﾈﾄ 2:46:34