Samsung AN19MS9U-EDC - Manual (Page 38)

User’s Manual 36
On-Screen Display
You can see the frequency (user control mode) used by the user, the polarity of
the operational signals, the default frequency (default mode) set when you buy
the monitor and the resolution level.
Note: These screens do not allow any changes to the settings, they are for
information only.
1 Push the Menu ( ) button.
2 Push the ◀ button or ▶ button until the Menu screen is displayed.
3 Push the Menu ( ) button to open the Display Timing
adjustment screen.
4 Use the ▼ button to see the user control mode and the default mode.
You can change the position where the OSD menu appears on your monitor.
1 Push the Menu( ) button.
2 Push the ◀ button or ▶ button until the Menu screen is displayed.
Push the ▲ button or ▼ button to select Menu Position.
3 Push the Menu( ) button to open the Menu Position
adjustment screen.
4 Use the ▲ ▼ button or ◀▶ button to place the menu in the
position you prefer.
Menu How to adjust
Display timing
Menu Position