Samsung LS24CMKKFV-ZA User Manual
Page 58
Asia Pacific
010-6475 1880
HONG KONG: 3698 - 4698
INDIA
3030 8282
1800 110011
1-800-3000-8282
INDONESIA
0800-112-8888
JAPAN
0120-327-527
MALAYSIA
1800-88-9999
New zealand
0800 SAMSUNG(0800 726
786)
PHILIPPINES
1800-10-SAMSUNG
(726-7864)
SINGAPORE
1800-SAMSUNG(726-7864)
THAILAND
1800-29-3232
02-689-3232
TAIWAN
0800-329-999
VIETNAM
1 800 588 889
Middle East & Africa
SOUTH AFRICA
0860-SAMSUNG(726-7864)
TURKEY
444 77 11
U.A.E
800-SAMSUNG(726-7864)
8000-4726
Terms
Dot Pitch
The image on a monitor is composed of red, green and blue
dots. The closer the dots, the higher the resolution. The dis-
tance between two dots of the same color is called the 'Dot
Pitch'. Unit: mm
Vertical Frequency
The screen must be redrawn several times per second in
order to create and display an image for the user. The fre-
quency of this repetition per second is called the Vertical
Frequency or Refresh Rate. Unit: Hz
Example: If the same light repeats itself 60 times per sec-
ond, this is regarded as 60 Hz.
Horizontal Frequency
The time to scan one line connecting the right edge to the
left edge of the screen horizontally is called the Horizontal
Cycle. The inverse number of the Horizontal Cycle is called
Horizontal Frequency. Unit: kHz
Interlace and Non-Interlace
Methods
Showing the horizontal lines of the screen from the top to
the bottom sequentially is called the Non-Interlace method
while showing odd lines and then even lines in turn is called
the Interlace method. The Non-Interlace method is used for
the majority of monitors to ensure a clear image. The Inter-
lace method is the same as that used in TVs.
Appendix
5
7