Network setup (pbc (wps)), Network setup (auto) – Samsung PN50C675G6FXZA User Manual

Page 31

English

Advanced

Featur

Network Setup (PBC (WPS))

How to set up using PBC (WPS)
If your router has a PBC (WPS) button, follow these steps:
1. Connect your TV to Samsung Wireless LAN Adapter as

described in the previous section.

2. Turn on your TV, press the

button on your

remote, use the

▲ or ▼ button to select Setup, and

then press the

ENTER

E button.

3. Use the

▲ or ▼ button to select Network in the Setup

menu, and then press the

ENTER

E button.

4. On the Network screen, select Network Type.
5. Set Network Type to Wireless.
6. Select Network Setup. The Network Setup screen

appears.

7. Press the Red button on your remote.
8. Press the PBC (WPS) button on your router within 2

minutes. Your TV player automatically acquires all the
network setting values it needs and connects to your
network.

9. After the network connection is set up, press the

RETURN

button to exit the Network Setup screen.

Network Setup (Auto)

Most wireless networks have an optional security system
that requires devices that access the network to transmit
an encrypted security code called an Access or Security
Key. The Security Key is based on a Pass Phrase, typically
a word or a series of letters and numbers of a specified
length you were asked to enter when you set up security for
your wireless network. If you use this method of setting up
the network connection, and have a Security Key for your
wireless network, you will have to enter the Pass Phrase
during the setup process.

Notice
The picture may appear corrupted for some channels when the TV is connected to the Samsung Wireless LAN Adapter. If this
occurs, connect the Samsung Wireless LAN Adapter using a USB cable in a place that is not affected by radio interference.

To reconnect the Samsung Wireless LAN Adapter using the extension
cable, follow these steps:

✎

The Samsung Wireless LAN Adapter should be installed in an
interference-free area in order to avoid interference between the
adapter and tuner.

1. Connect the extension cable to the

USB 2 (HDD)

port.

2. Connect the extension cable and Samsung Wireless LAN

Adapter.

3. Attach the Samsung Wireless LAN Adapter to the back of the TV

near the top, using double-sided adhesive tape.

Method: Connect via an extension cable

Wireless Network Setup

PBC(WPS) U Move E Enter R Return

Select a Network

: Not Selected ►

Internet Protocol Setup

: Auto

IP Address

Subnet Mask

Gateway

DNS

: Auto

DNS Server

[PC675_ZA]BN68-03211A-00Eng.indb 31

2010-09-06 오전 9:32:07