Samsung EC-PL80ZZBPSCA - Manual (Page 49)

48
Ê Saturation
You can change the saturation of the image.
1. Select [Saturation] by pressing the
Up/Down button.
2. Change the saturation by pressing
the Left/Right button.
3. Press the Shutter button to take an
image.
å When Photo Style Selector is set, image adjust is not available.
å When Image Adjust is set, Face Detection mode is not available.
Shooting ( )
This feature allows you to minimize camera shake while taking a
picture.
- [OIS] Sub menus: [Off], [On]
OIS (Optical image Stabilization)
å OIS function may not work suffi ciently in the following cases.
- To take pictures of a moving subject.
- To take pictures with higher digital zoom values.
- When camera shake is beyond the camera-shake correction range.
- When the shutter speed is slow.
Ɣ When you use the OIS function after mounting your camera on a
tripod, the vibration of the OIS sensor may cause image shake. In
this case, it is recommended to turn the OIS function off.
Ɣ When you capture an image after shock is given to the camera, the
LCD screen may shake. In this case, turn the camera off and then
on for proper operation.
Ɣ When the battery is too low ( ), the OIS function will not work.
Ɣ When the shooting speed exceeds 1 second, the timer function is
selected or the battery is low, the OIS icon will turn gray and the
OIS function will not work.
Back Move
Contrast
Sharpness
Saturation
Image Adjust
Back Move
OIS