Samsung LN22B350F2DXZA - Manual (Page 8)

English-
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
1
With the power on, press the MENU button.
The main menu appears on the screen.
The menu’s left side has icons: Picture, Sound,
Channel, Setup, Input, Support.
Press the ▲ or ▼ button to select one of the icons.
Then press the ENTERE button to access the
icon’s sub-menu. Press the EXIT button to exit.
The on-screen menus disappear from the
screen after about one minute.
➣
Storing Channels in Memory
(Automatic Method)
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then
press the ENTERE button.
Press the ▲ or ▼ button to select “Auto Program”,
then press the ENTERE button.
Press the ▲ or ▼ button to select the antenna
connection, then press the ENTERE button.
When selecting the Cable TV system: Press the
ENTERE button to start the auto program.
Press the ▲,▼, ◄ or ► to select the correct analog
signal cable system source among “STD”, “HRC”,
and “IRC”. Press the ▲ or ▼ button to select “Start”,
then press the ENTERE button. If you have Digital
cable TV, select the cable system signal source for
both Analog and Digital. Viewing the Menus
The TV begins memorizing all available stations.
Press the EXIT button to exit.
To Stop the Auto Program Function
Press the MENU button while the Auto Program function is
being executed. You can also press the ENTERE button
to stop the setup.
Checking to see if Channels were Stored in Memory
Press the CH button. Only the channels stored in memory
will be selected (in order).
Selecting the antennas
• Air: “Air” antenna signal.
• Cable: “Cable” antenna signal.
• Auto: “Air” and “Cable” antenna signals.
After all the available channels are stored, it
starts to remove scrambled channels. The Auto
program menu then reappears.
➣
U Move E Enter m Skip
Auto Program
Select the Antenna source to memorize.
Air
Cable
Auto
Start
Start
Start
Auto Program
Selects the cable system.
Analog
Digital
HRC IRC
HRC IRC STD
Start
STD
U Move E Enter m Skip
Auto Program
Auto Program in Progress.
Stop
Cable 38
50%
DTV Cable : 12 Cable : 32
E Enter m Skip
Auto Program
Removing scrambled channel.
Stop
DTV Cable 41
77%
DTV Cable : 16 Cable : 45
E Enter m Skip
BN68-01976G-00Eng.indd 8 2009-05-22 �� 3:23:55