Maintaining your washer, Cleaning the door seal/gasket, Preserving the top cover and the front frame – Samsung WF56H9100AG-A2 User Manual
Page 30

30_
English
cleAninG tHe door seAl/GAsket
1. Open the washer door and remove any clothing or items from the washer.
2. Check if there are any foreign substances on the grey seal/
gasket between the lid and the drum.
To check this, turn the seal/gasket out.
3. If there are any foreign substances, remove them.
4. If you find stained areas, wipe them down using the procedure below:
a) Carefully combine ¾ cup (177 mL) of liquid chlorine bleach with 1 gal. (3.8 L) of warm
tap water.
b) Wipe the seal/bellow area with the dilute solution using a damp cloth.
c) Let stand 5 minutes.
d) Wipe down the area thoroughly with a dry cloth and let the washer interior air dry with
the door open.
imporTanT:
• Wear rubber gloves when cleaning for prolonged periods.
• Refer to the bleach manufacturer’s instructions for proper use.
preserVinG tHe top coVer And tHe Front FrAme
Do not place any heavy or sharp objects or a detergent box on the washing machine. They can scratch or
damage its top cover. Keep them in the pedestal (if purchased) or in a separate storage box.
Since the entire washing machine has a high-gloss finish, the surface can be scratched or damaged.
Avoid scratching or damaging the surface when using the washing machine.
maintaining your washer
seal/gasket
(USER)WF56H9100-03404A_EN.indd 30
2014-3-7 10:58:26