Setting up the tv with your pc, Basic features, Picture reset (ok / cancel) – Samsung LN40C500F3FXZA User Manual

Page 18: Auto adjustment, Screen

English

Basic Features

After selecting Screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you may need to
center the picture:
1. Press the

◄ or ► button to select Position.

2. Press the

ENTER

E button.

3. Press the

▲, ▼, ◄ or ► button to move the

picture.

4. Press the

ENTER

E button.

5. Press the

◄ or ► button to select Reset.

6. Press the

ENTER

E button.

HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)

Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.

Input Source

Picture Size

ATV, AV,
Component (480i, 480p)

16:9, Zoom1,
Zoom2, 4:3

DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)

16:9, 4:3, Wide Fit,
Screen Fit

16:9, 4:3

■

Digital NR (Off / Low / Medium / High / Auto): If the
broadcast signal received by your TV is weak, you can
activate the Digital NR feature to reduce any static and
ghosting that may appear on the screen.

✎

When the signal is weak, try other options until the
best picture is displayed.

■

HDMI Black Level (Normal / Low): Selects the black
level on the screen to adjust the screen depth.

✎

Available only in HDMI mode.

■

Film Mode (Off / Auto): Sets the TV to automatically
sense and process film signals from all sources and
adjusts the picture for optimum quality.

✎

Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).

Picture Reset (OK / Cancel)

Resets your current picture mode to its default settings.

Setting up the TV with your PC

Set the input source to PC.

m → Picture →

ENTER

Auto Adjustment

Adjust frequency values/positions and fine tune the settings
automatically.

✎

Not available when connecting with an HDMI/DVI cable.

Screen

■

Coarse / Fine: Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse) and Fine-
tune again. After the noise has been reduced, readjust
the picture so that it is aligned to the center of screen.

■

PC Position: Adjust the PC’s screen positioning if it
does not fit the TV screen. Press the

▲ or ▼ button to

adjust the Vertical-Position. Press the

◄ or ► button to

adjust the Horizontal-Position.

■

Image Reset: Resets the image to default settings.

[LC500-NA]BN68-03219A-01L03.indb 18

2010-09-27 오전 10:49:40