Samsung LN32D403E2DXZA - Manual (Page 2)

English - 2
BN68-03810A
BN68-03810A-00
Setting the Clock
Before you can use your TV’s On/Off Timer, you must set the clock. To set the
clock, follow these steps:
1. Turn on your TV.
2. Using your remote, press the
MENU button on your remote.
Then, select Setup → Time.
3. Select Clock Mode, and then
press the ENTERE button.
Set Clock Mode to Auto or
Manual.
✎ Select Auto if you have a
digital channel in your area
and are not using a cable/sat box.
4. Select Clock Set, and then press the ENTERE button. The Clock Set screen
appears.
5. Using the number buttons on your remote, enter the Month, Day, Year, Hour,
and Minute. Use the ◄ or ► button to move between entry fi elds.
6. Press the RETURN button on your remote when done.
Connecting a USB Device for Media Play
You can enjoy photo and music fi les stored on a USB device
by connecting it to the TV and using the Media Play feature.
To connect a USB device for Media Play, follow these steps:
1. Turn on your TV.
2. Connect a USB device containing
photo and music fi les to the USB
jack on the rear of the TV.
3. When the Application selection
screen appears, press the
ENTERE button on your remote
to select Media Play (USB).
Remote Control Buttons and Functions:
MEDIA.P
A B C D
FAV.CH
Return to the previous channel.
Press to switch between the sources (Blu-ray player,
cable box, DVD player, etc.) connected to your TV.
MTS : Press to choose stereo, mono or Separate
Audio Program (SAP broadcast).
P.SIZE : Picture size selection.
CC : Controls the caption decoder.
Cut off the sound temporarily.
Display favorite channel lists on the screen.
Press to display information on the TV screen.
Exit the menu.
Change channels.
Display the main on-screen menu.
Changing the Picture Mode
Your TV has three preset Picture Modes with factory adjusted settings, each
designed to give you an excellent picture under specifi c conditions.
The Picture Modes are listed and described in the table below:
Mode Description
Dynamic Brightens picture. For a vibrant, enhanced image in brightly lit or
sunny room.
Standard For a bright, detailed picture in a normally lit room.
Movie For a studio quality cinema picture in a dimly lit or dark room.
To change the Picture Mode, follow these steps:
1. With the TV on, press the TOOLS button on your remote.
The Tools menu appears.
2. Using the ▲ or ▼ on your remote, select Picture mode.
3. On the Picture Mode menu, use the ◄ or ► on your remote to select
the Picture Mode you want.
4. Press the EXIT button to exit the menu.
Viewing the On Screen Menus
To view the On Screen Menus, follow these steps:
1. With the power on, press the MENU button
on your remote. The main menu appears.
The menu’s left side has the following menu
options: Picture, Sound, Channel, Setup,
Input, Application, and Support.
2. Press the ▲ or ▼ button on your remote to
select a menu option, and then press the ENTERE button.
3. When done using the menu, press the EXIT button on your remote to exit.
MEDIA.P
A B C D
FAV.CH
MENU
Changing the Screen Size
Your TV has several screen size options, each designed to work best with specifi c
types of video input. If you have a cable box or satellite receiver, it may have its own
set of screen sizes as well.
To change the screen size, press the
P.SIZE button on your remote. The fi rst time
you press it, your TV displays the current setting. Thereafter, each time you press
the P.SIZE button, you change the size of the picture on the screen.
The following sizes are available:
16:9 Wide screen
Wide Fit
Zoom 1
4:3 Standard screen
Zoom 2
Screen Fit
✎ Screen Fit displays a full HD picture covering the entire screen with no cutoff
on any side. It is only available when your TV inputs an HDMI (720p, 1080i,
1080p), Component (1080i, 1080p), or DTV (over-the-air 1080i) signal.
Selecting a Source
To watch a movie on your Blu-ray player or watch
your favorite TV show, you must select the correct
source. A source is a device, such as a Blu-ray/
DVD player, a cable/satellite box, antenna or a
cable TV input. Sources can be connected to
your TV through the HDMI, DVI, Component,
Composite, or D-sub connections, or through the
Antenna or Cable In connections.
To view the signal from a source connected to the HDMI, DVI, Component,
Composite, or D-sub jack, press the SOURCE button on your remote. Each time
you press the SOURCE button, you change to a different source.
Changing Channels and Adjusting the Volume
Channel Volume
Change the channels by pressing
the
z button on the remote.
✎ If your TV is attached to a cable or
satellite box, change the channel
using the box’s remote.
Adjust the volume by pressing the
y button on the remote.
MEDIA.P
A B C D
SLEEP
MEDIA.P
A B C D
SLEEP MEDIA.P
A B C D
SLEEP
Basic Functions
Clock Set
L Move U Adjust E Enter R Return
Month
Hour
Day
Minute
Year
am/pm
--
--
--
--
----
--
L Move E Enter R Return
Press to select additional digital channels broadcast by
the same station. For example, to select channel 54-3,
press 54, press -, and then press 3.
Press number buttons for direct access to channels.
Turns the TV on and off.
Displays the channel list on the screen.
Quickly selects frequently used functions.
Use these buttons to select On Screen Menu items and
change menu settings.
Return to the previous menu.
View the Media Play .
Colored buttons for use in the Channel List, Media Play
menu, etc.
Adjust the volume.
TV Rear Panel
USB Drive
[LD403-QSG]BN68-03810A-Eng.indd 2 2011-05-27 �� 4:27:19