beautypg.com

Connecting to a power source – Samsung EC-SL105ZBDBUS User Manual

Page 13

background image

12

Connecting to a Power Source

Ê SLB-10A rechargeable battery Specifi cation

Model

SLB-10A

Type Lithium

lon

Capacity 1050mAh
Voltage 3.7V
Charging time

Approximately 180 Minutes

You should use the rechargeable battery SLB-10A supplied with the
camera. Be sure to charge the battery before using the camera.

Ê Number of images and battery life: Using the SLB-10A

Battery life /

Number of images

Conditions

Still image

Approx. 140 MIN /
Approx. 280 shots

Using the fully charged battery, Auto
mode, 12M image size, Fine image
quality, Shot to shot interval: 30Sec.
Changing the zoom position between
the Wide and the Tele after every shot.
Using the fl ash on every second shot.
Using the camera for 5 minutes and
then powering it off for 1 minute.

Movie

Approx. 120 MIN

Using the fully charged battery
640x480 image size
30fps frame rate

Ä These fi gures are measured under Samsung’s standard conditions

and shooting conditions and may vary depending on the user’s
methods.

Important information about battery usage.
å When camera is not in use, turn off the power.

å Please remove the battery if the camera will not be used

for long periods. Batteries can lose power over time and are
prone to leaking if kept inside the camera.

å Low temperatures (below 0°C) can affect the performance

of the battery and you may experience reduced battery life.

å Batteries will usually recover at normal temperatures.

å During extended use of the camera, the camera body may

become warm. This is perfectly normal.

Ê If you connect the AC adapter to the USB cable, you can use it

as an AC cable and recharge the spare battery with it.

- Using an AC cable

: Connect the AC adapter to the

USB cable. It can be used as a
power cable.

- Using a USB cable

: Remove the AC adapter.You can

download stored images to your
PC (p.86) or supply the power
to your camera through the USB
cable.