AEG KO SANTO 290-6I - Manual (Page 14)

37
1. The wire coloured green and yellow must be connected to the termi-
nal marked with the letter ãEÒ or by the earth symbol or coloured green
and yellow.
2. The wire coloured blue must be connected to the terminal ãNÒ or
coloured black.
3. The wire coloured brown must be connected to the terminal marked
ãLÒ or coloured red.
4. Upon completion there must be not cut, or stray strands of wire pre-
sent and the cord clamp must be secure over the outer sheat.
Warning! A cut-off plug inserted into a 13 amp socket is a serious safety
(shock) hazard. Ensure that the cut-off plug is disposed of safely.
Starting up and temperature regulation
0 Insert the plug of the connection lead into the plug socket with pro-
tective earth contact. When the refrigerator compartment door is ope-
ned, the internal lighting is switched on. The temperature selector
knob is located on the RH side of the refrigerator compartment.
Setting г0Т means: Off.
Setting г1Т means: Hightest temperature, (warmest setting).
Setting г6Т (end-stop) means: Lowest temperature, (coldest set-
ting).
However, the exact setting should be chosen keeping in the mind that
the temperature inside the refrigerator depends on:
-the quantity of food stored
-how often the door is opened
The temperatures in the refrigerator compartment and freezer co part-
ment cannot be independently regulated.
If you want the freeze fresh food rapidly, select setting г6Т, ensuring
that the temperature in the refrigerator compartment does not drop
blow 0¡C. You should also promptly reset the temperature regulator to
setting г3Т or г4Т.
Important!
High ambient temperatures (e.g. on hot summer days) and a cold set-
ting on the temperature regulator (position"5" to "6") can cause the
compressor to run continuously.
If this happens, turn the temperature regulator back to a warmer set-
ting (position "3" to "4"). At this setting the compressor will be switched
on and off as usual and automatic defrosting recommenced.