Samsung PN58A550S1FXZA - Manual (Page 9)

English -
4
When selecting the Cable TV system:
Press the ENTER button to start the auto program.
Press the ▲, ▼, ◄, ► to select the correct analog
signal cable system source among STD, HRC, and
IRC, then press the ENTER button. If you have
Digital cable TV, select the cable system signal
source for both Analog and Digital.
➢ STD, HRC, and IRC identify various types of
cable TV systems. Contact your local cable
company to identify the type of cable system
that exists in your particular area. At this point
the signal source has been selected.
5 The TV begins memorizing all available stations.
If you want to stop Auto Programming, press the
ENTER button.
The Stop Auto Program? message will be
displayed. Select Yes by pressing the ◄ or ►
button, then press the ENTER button.
● The TV must be connected to an antenna/cable
in order to receive digital TV signals. Even if a
particular channel is deleted from the memory,
you can always tune to that channel directly by
using the number buttons on the remote control.
Viewing All Channels
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then
press the ENTER button.
2 Press the ▲ or ▼ button to select Channel List,
then press the ENTER button.
Press the ◄ button to select Added Channels.
3 Press the ▲ or ▼ button to select All Channels,
then press the ENTER button. Shows all currently
available channels. Press the ▲ or ▼ button to
select a channel to view, then press the ENTER
button.
6-1 ♥ SBS
7 Air
7-1 ♥ KBS D-2
9 Air
9-1 ♥ KBS D-1
10 Air
10-1 ♥ EBS DTV
11-1 ♥ MBC DTV
19 Air
22 Air
All Channels
Air ■ Antenna ■ Zoom ■ Select Option ► Next Program TOOLS
Continued...
Auto Program
Stop Auto Program?
Air 10
3%
Return Enter
No Yes
Move
Auto Program
Select the cable system.
Analog
Digital
STD HRC IRC
HRC IRC STD
Return Enter Move
1 Press the MENU button to display the menu.
Press the ENTER button to select Picture.
Press the ENTER button to select Mode.
Press the ▲ or ▼ button to select Dynamic,
Standard, or Movie, then press the ENTER button.
Picture Mode
•
Dynamic: Select the picture for high-definition in a
bright room.
• Standard: Select the picture for the optimum display
in the normal environment.
• Movie: Select the picture for viewing movies in a
dark room.
Picture Control
Changing the Picture Standard
You can select the type of picture which best corresponds to your
viewing requirements.
Picture
Mode :
Cell Light : 7
Contrast : 80
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
Detailed Settings
Dynamic
Standard
Movie
1 To select the desired picture mode, follow the
“Changing the Picture Standard” instructions number
1.
2 Press the ▲ or ▼ button to select Cell Light,
Contrast, Brightness, Sharpness, Color, or Tint
(G/R), then press the ENTER button.
Customizing the Picture Settings
Mode : Standard
Cell Light : 7 ►
Contrast : 95
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
Detailed Settings
Picture Options
Picture
BN68-01363C-00Eng.indd 9 2008-02-13 오전 2:25:51