Starting the multi slide show ( ), Selecting images, Configure multi slide show effects – Samsung EC-SL30ZBBA-US User Manual

Page 67

Starting the Multi Slide Show (

)

You can select image to view

1. Use the Up / Down buttons to select the

[Images] menu and press the Right button.

2. Select a desired sub menu by pressing

the Up / Down button.

[All]

: All images saved in the

Memory are played back.
Press the OK button to save the configuration.

[Date] : Images taken in a specified date are played back.

Press the OK button to save the configuration.

[Select] : Play only the selected images. The selected image

can be saved as [Select1], [Select2] and [Select3].
If you save the selected image with the [New Select]
command, it will be saved as [Select1]. But when a
new image is saved again using [New Select], the
former image which had been saved as [Select1] will
be saved as [Select2] automatically.You can change
and cancel the images which were saved as [Select1],
[Select2] and [Select3]. Press the Fn button to save
the configuration.

3. Select [Play] or [Repeat] in the [Start] menu to start the multi

slide show.

Selecting Images

Back Set

Images :All

Effect :Off

Interval :1

sec

Music :Off

Start

All
Date

Select

Unique screen effects can be used for the Multi Slide Show.
1. Select the [Effect] sub menu by pressing

the UP / DOWN button and press the
RIGHT button.

2. Use the Up / Down button to select the

type of effect.

3. Press the OK button to confirm the

setting.

Configure Multi Slide show effects