Samsung SM-352FENB - Manual (Page 22)

SAMSUNG continually strives to improve its products. Both the design specifications and these user
instructions are thus subject to change without notice.
*Note) The SM-352BB/XRA model does not support DVD-RAM disc.
Technical Specifications
ITEM CD-RW DVD/CD
DISC Disc types
supported
in read mode DVD-ROM, DVD-RAM, DVD-VIDEO, DVD-R, DVD - RW, CD-DA
(Audio), CD-ROM, CD-ROM XA, CD-Plus, CD-Extra,
Photo-CD (Single, Multi-session), Video CD ready, Enhanced CD,
CD-I/FMV, CD-R, CD-RW, CD-TEXT
Erasing disc types CD-RW
Disc diameter
120 mm or 80 mm
DRIVE
PERFORMANCE Data transfer rate Recording CD-R: 1200 KB/sec. (8X),
2400 KB/sec. (16X), 3600 KB/sec. (24X),
4800 KB/sec. (32X), 6000 KB/sec. (40X),
7200 KB/sec. (48X), 7800 KB/sec. (52X)
CD-RW :
Ultra Speed Writing DISC:
2400 KB/sec. (16X),
3600 KB/sec. (24X),
High Speed Writing DISC:
1500 KB/sec. (10X),
Low Speed Writing DISC:
600 KB/sec. (4X),
Reading CD/CD-R: CAV 52
DVD: CAV 16
Multiword DMA mode 2:16.6MB/sec
Ultra DMA mode 2:33.3MB/sec
Access time 130ms 130ms/110ms
Data Buffer 2MB
Laser Semiconductor laser
Slide mechanism Stepping motor
Spindle motor Brushless motor
Load mechanism Tray. DC motor (Soft Eject). Horizontal/Vertical.
ERROR RATE Mode 1: 1 block/10 -12 , Mode 2: 1 block/10 -9
FRONT PANEL Eject button Auto eject or Auto inject
Indicator
If the Power is ON/BUSY, this means the disc is loaded.
Green: Reading/Recording Status
Headphone output Stereo mini-jack (Ø 3.6 mm) 0.65V ± 20% (rms) 33 ohm
Volume control
Dial type
REAR PANEL Required power +5 V : 1.2 A (rms), +12 VDC: 1.5 A (rms)
Interface connector ATAPI (E-IDE)
Audio output
Line out 0.7V ± 20% : 47Kohm
Jumper block Molex 70203 or other compatible models
OPERATING
ENVIRONMENT Operations Temperature: 5~45°C Humidity: 10~80%
Storage Temperature: -25~60°C Humidity: 10~90%
GENERAL
Dimensions 148.2 (W) x 42 (H) x 184 (D) mm (including bezel)
Net weight 750 g
RELIABILITY MTBF 100,000 POH(Duty 25%)
Troubleshooting
4800 KB/sec. (32X)