Samsung HLP5685WX-XAC - Manual (Page 10)

Connecting a DVD Player
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
Connecting to Y,P
B
,P
R
1 Connect a set of audio cables
between the COMPONENT (1 or 2)
AUDIO (L,R) IN jacks on the TV and
the AUDIO OUT jacks on the DVD
player.
2
To enable Component video
viewing, connect a set of video
cables between the COMPONENT
(1 or 2) VIDEO (Y, P
B , P R ) IN jacks
on the TV and VIDEO (Y/P B /P R or
Y/C
B
/C
R
) OUT jacks on the DVD
player.
Note: For an explanation of Component
video, see your DVD player's owner's
manual.
Connecting to Audio and Video Jacks
1 Connect a set of audio cables
between the AUDIO IN (1 or 2)
jacks on the TV and the AUDIO
OUT jacks on the DVD player.
2
Connect a video cable between the
VIDEO IN (1 or 2) jack on the TV
and the VIDEO OUT jack on the
DVD player.
English - 19
Connecting a Camcorder
The rear panel jacks on your TV make it easy to connect a camcorder to your TV.
You can use your camcorder to view tapes without using a VCR.
1
Locate the A/V output jacks on the
camcorder. They are usually found on
the side or back of the camcorder.
2 Connect a set of audio cables between
the AV (1 or 2) AUDIO (L,R) IN jacks
on the TV and the AUDIO OUT jacks
on the camcorder. If you have a mono
camcorder, connect L(mono) to the
camcorder audio out using only one
audio cable.
3 Connect a video cable between the AV
(1 or 2) VIDEO IN (or S-VIDEO IN)
jack on the TV and the VIDEO OUT
jack on the camcorder. The audio-
video cables shown here are usually
included with a Camcorder. (If not,
check your local electronics store.)
If your camcorder is stereo, you need
to connect a set of two cables.
Connections
English - 18
Camcorder
Output Jacks
TV Rear Panel
Camcorder
TV Rear Panel
DVD Player
Incoming Cable or Antenna
TV Rear Panel
DVD Player
Incoming Cable or Antenna
BP68-00352B-00(12~21) 7/22/04 2:22 PM Page 18