Samsung UN65D8000XFXZA - Manual (Page 108)

▶
English
▶
How to set up using the Plug & Access function
1. Turn on the Samsung wireless router and your TV.
2. Insert a USB memory stick into the USB port in your Samsung wireless router.
Check the router’s LED’s to make sure it is on (Blinking → on).
3. Take the USB memory stick out of the router, and then insert it into a USB port
on your Samsung TV. The memory stick downloads the connection information.
4. Wait until the connection is automatically established.
N
If Plug & Access does not connect your TV to your wireless router, a pop-
up screen appears on the screen notifying you of the failure. If you want
to try using
Plug & Access again, reset the AP, disconnect the Samsung
Wireless LAN adapter and then try again from Step 1. You can also choose
one of the other connection setup methods.