Samsung FPT5084X-XAA - Manual (Page 74)

English - 74
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu Description
View TV Switches from Anynet+ to TV broadcast mode.
Record Starts a recording. (This menu works only for a device supporting recording.)
(Device_Name) Menu Shows the menu of the connected device.
Example: When a DVD Recorder is connected, the DVD Recorder’s title menu appears.
(Device_Name) Operation Shows the play control menu of the connected device.
Example: When a DVD Recorder is connected, the play control menu of the DVD Recorder
appears.
Connect (Device_Name) Your TV connects to the corresponding device.
Receiver Sound is output through the receiver (home theater).
Setup You can set the Anynet+ (HDMI-CEC), auto turn off, and searching connections for using
Anynet+.
TV Remote Control Buttons Available in Anynet+ Mode
Device Type Operating Status Available Buttons
Anynet+ Device
After switching to the device, when the menu of the
corresponding device is displayed on the screen.
Numeric buttons
▲/▼/◄/►/ ENTER buttons
Color buttons
EXIT button
After switching to the device, while playing a file
◄◄ (Backward search)
►►(Forward search)
 (Stop)
►   (Play/Pause)
Device with built-in Tuner
After switching to the device, when you are watching
a TV program
CH ▲/▼ button
Audio Device When a Receiver is activated
VOL +/- button
MUTE button
➢ The Anynet+ function only works when the active source on the TV remote control is set to TV.
➢ The REC button works only while in the recordable state.
➢ You cannot control Anynet+ devices using the buttons on the side of the TV. You can control Anynet+ devices only
using the TV remote control.
➢ The TV remote control may not work under certain conditions. In this case, reselect the Anynet+ device.
➢ The Anynet+ functions do not operate with other manufacturers’ products.
➢ The ◄◄ , ►► operations may differ depending on the device.
Recording
You can make a recording of a TV program using a recorder.
Press the
REC button.
Recording begins. (Only when the Anynet+ enabled recording device is connected.)
➢ You can record the source streams by selecting Record after pressing the Anynet+ button.
➢ Pressing the REC button will record whatever you are currently watching. If you are watching video from another
device, the video from the device is recorded.
➢ Before recording, check whether the antenna jack is properly connected to the recording device.
To properly connect an antenna to a recording device, refer to the recording devices users manual.
BN68-01094P-00Eng.indb 74 2007-04-13 ¿АИД 5:33:22