Samsung CW29M026V7XXEC - Manual (Page 35)

Use the remote control to switch between viewing signal from
connected equipment, such as VCR, DVD, Set-Top-boxes and the
TV source (broadcast or cable).
1 Press the MENU ( ) button.
Result: The main menu is displayed.
2 Press the ENTER ( ) button to select Input.
Result: The options available in the Input group are
displayed.
3 Press the ENTER ( ) button again to select Source List.
Result: The options available in the Source List group are
displayed.
4 Press the
▲ or ▼ button to select signal source, then press the
ENTER ( ) button.
➢
When you connect equipment to the TV, you can choose
between the following sets of jacks : EXT1 or EXT2 on the
TV’s rear panel, and AV/S-Video on the TV’s side panel.
➢
You can also set these options simply by pressing the
SOURCE (
) button. If you change the external source
while viewing, pictures might take a short period of time to
be switched.
Edit Name
1 Press the MENU ( ) button.
Result: The main menu is displayed.
2 Press the ENTER ( ) button to select Input.
Result: The options available in the Input group are
displayed.
3 Press the
▲ or ▼ button to select Edit Name.
Press the ENTER ( ) button.
Result: The options available in the Edit Name group are
displayed.
4 Press the ▲ or ▼ button to select external device :
EXT1 - EXT2 - AV - S-Video.
5 Select the name by pressing the œ or √ button.
6 Set other signal sources (EXT1, EXT2, AV, S-Video) using the
same method as listed above.
Viewing an External Signal Source/Edit Name
(depending on the model)
Move Enter Return
Input
Source List : TV √ √
Edit Name √ √
TV
Move Enter Return
Input
Source List : TV √ √
Edit Name √ √
TV
Move œ œ √ √ Adjust Return
Edit Name
EXT1 œ œ ------ √ √
EXT2 : ------
AV : ------
S-Video : ------
TV
Move œ œ √ √ Adjust Return
Edit Name
EXT1 œ œ DVD √ √
EXT2 : ------
AV : ------
S-Video : ------
TV
Move Enter Return
Source List
TV
EXT1 : ------
EXT2 : ------
AV/S-Video : ------
TV
English - 35
AA68-03660A-00Eng 7/21/05 2:58 PM Page 35