Samsung DV455GVGSWR-AA - Manual (Page 56)

English - 56
Operating instructions, tips
5. Follow the instructions displayed on the phone to start the dryer
setup.
Figure 6
6. Once the “AP” is displayed you need to turn the knob counter
clockwise until “PS” is displayed. After the “PS” is displayed press the
Start/Pause button.
Figure 7
7. Once the Start/Pause button is pressed the “PS” will start to blink.
Once it starts blinking the phone will automatically start to connect.
Figure 8
8. After the “PS” is displayed, press the Temp & Start/Pause buttons
simultaneously for 3 seconds. Please wait until the Smart Control
Enabled icon [
] starts blinking. If the Smart Control enabled icon
starts blinking, press and hold the Signal on/off button for 3 seconds
to activate the Smart Control. If the Smart Control is enabled, the
Smart Control enabled icon [
] is turned on.
Figure 9
DV455_02836F-08_EN.indd Sec3:56 DV455_02836F-08_EN.indd Sec3:56 2013-12-12 5:12:10 2013-12-12 5:12:10