Samsung TXS3064WRX-XAC - Manual (Page 13)

English-13
Connecting an Amplifier/DVD Home Theater
1 2
1. Connect Audio Cables
between the AV OUT
[L-AUDIO-R] on the TV
and AUDIO IN on the
Amplifier/DVD Home
Theater.
When an audio amplifier
is connected to the
“AUDIO OUT [L-AUDIO-
R]” terminals: Decrease
the gain (volume) of the
TV, and adjust the
volume level with the
Amplifier’s volume
control.
Amplifier/DVD Home Theater
TV Rear Panel
Audio Cable (Not supplied)
➢
Each external input source device has a different back panel configuration.
➢
When connecting an external device, match the color of the connection terminal to the cable.
Operation
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
Plug & Play Feature
When the television is initially powered on, three basic customer settings proceed automatically and subsequently: setting the language,
channel and clock.
1. Press the POWER button on the remote control.
The message “Plug & Play” is displayed. It flickers for a little while and then
Language menu is automatically displayed.
2. Press the … or † button to select the language, then press the ENTER
button.
The message “Check antenna input.” is displayed.
➢
If any language is not selected on the Language menu, the Language menu will
disappear about 30 seconds later.
3. Make sure that the antenna is connected to the TV.
Press the ENTER button.
The “Search” menu is displayed.
Continued...
Plug & Play
Move Enter Skip
Setup
Plug & Play
Language :
Time
V-Chip
Caption
† † More
TV
Enter Return
Start Plug & Play.
OK
Plug & Play
Enter Skip
Check antenna input.
OK
English
Español
Português
Français
AA68-03871A-00Eng 7/18/06 6:07 PM Page 13