AEG COMPETENCE B4101-4 - Manual (Page 18)

18
3
How to use the clock functions
• After a function has been selected, the corresponding function indi-
cator flashes for about 5 seconds. During this period, the desired
times can be set using the
or button.
• When the desired time has been set, the function indicator continues
to flash for approx. 5 seconds. After that the function indicator is
then lit. The set time begins to run.
• Press any of the buttons to stop the audible signal.
• The desired oven function and temperature can be selected before or
after the clock functions Cook time and End time are set.
• When the cooking process is completed, turn the oven function dial
and the temperature selector back to the OFF position.
2
Switching Off the Time Display
By switching off the time display you can save energy.
Switching off the time display
Press and hold down any two buttons until the display becomes dark
(approx. 10 seconds).
Switching on the time display
Press and hold down any two buttons until the time reappears in the
display (approx. 10 seconds).
3
The display can only be switched off if none of the clock functions
Cook time
, End time or Countdown is in use.