Samsung EC-SL600ZBPBUS - Manual (Page 81)

080
PictBridge : Reset
Initializes user-changed configurations.
1. Use the Up / Down button to select the
[Reset] menu tab. And then press the
Right button.
2. Use the Up / Down button to select the
desired sub menu and then press the
OK button.
If [Yes] is selected : All print and image
settings will be reset.
If [No] is selected : Settings will not be reset.
Ä Default print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that came
with your printer.
Important notes
Be sure to observe the following precautions!
å This unit contains precision electronic components. Do not
use or store this unit in the following locations.
- Areas exposed to severe changes in temperature and humidity.
- Areas exposed to dust and dirt.
- Areas exposed to direct sunlight or the inside of a vehicle in hot
weather.
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
å Do not leave this camera in places subject to dust, chemicals
(like naphthalene and mothballs), high temperature and high
humidity. Keep this camera with silica gel in a hermetically
sealed box when not planning to use the camera for a long
period of time.
å Sand can be particularly troublesome to cameras.
- Do not let sand get inside the camera when using it on beaches,
coastal dunes, or other areas where there is lots of sand.
- Doing so may result in failure or may permanently render the
camera unusable.
å Handling the camera
- Never drop the camera or subject it to severe shocks or vibrations.
- Protect the large size LCD monitor from an impact. When this
camera is not used, keep it in the camera case.
- Avoid obstructing the lens or the flash when you capture an image.
- This camera is not waterproof.
To avoid dangerous electrical shocks, never hold or operate the
camera with wet hands.
- If you use this camera in wet places, such as beach or pool, do
not let water or sand get inside the camera. Doing so may result
in failure or may permanently damage the unit.
Back Set
File Name :Auto
Reset No
Date :Auto
Yes
No