Samsung LTP266WX-XAA - Manual (Page 38)

English- 35
O P E R AT I O N
3
Press the UP/DOWN
buttons to select “Source”,
then press the ENTER
button.
Select a source of the sub
picture by pressing the
UP/DOWN
buttons and
press the ENTER button.
Swapping the Contents of the PIP and Main image
Selecting a Signal Source (External A/V) for PIP
5
Press the UP/DOWN
buttons to select “Ch.(Channel)”,
then press the ENTER
button.
Changing the PIP Channel
6
Press the UP/DOWN
buttons to select “Position”,
then press the ENTER
button.
Changing the Position of the PIP Window
7
Press the UP/DOWN
buttons to select “Size”,
then press the ENTER
button.
Press the EXIT button
to exit.
Changing the Size of the PIP Window
• When the PC is in energy saving mode, you cannot choose the PIP option.
• You may notice that the picture in the PIP window becomes slightly unnatural when you set the main
screen to game or karaoke mode.
• Switch the main screen and the PIP window for normal viewing.
• You can adjust picture position only by using the
size menu.
4
Press the UP/DOWN
buttons to select “Swap”,
then press the ENTER
button.
Note :Source selection is possible only when Component 1,
Component 2, DVI, or PC is connected.
MAIN:PC, DVI, Component 1 or 2,
PIP:TV
“Channel” is inactive and not
available in TV mode. However,
they become active and available
in PC, DVI, Component 1 and 2 modes.
When main picture is set to TV/AV/
S-Video, only Component1/Component2/
DVI/PC can be selected and when main
picture is set to Component1/
Component2/DVI/PC, only TV/AV/
S-Video can be selected.
BN68-00656A-01Eng.qxd 5/7/04 9:34 AM Page 35