Samsung WF457ARGSGR-AA - Manual (Page 56)

56_ Maintaining your washer
Maintaining your washer
CLEANING THE DEBRIS FILTER
We recommend cleaning the debris filter when water does not drain well or the “nd” error message is
displayed.
1. Open the filter cover by pressing and then pulling the
handle of the filter cover with your finger.
Filter cover
2. Holding the drain cap, pull the drain tube that is hooked
onto the guide hook to the front. Do not pull the drain tube
with excessive force.
3. Place a bowl under the washer to catch any remaining
water. Then, hold the drain tube with one hand, and turn
the emergency drain cap counter clockwise with the other
hand to separate it from the drain tube.
4. Drain the remaining water completely.
Drain cap
Step 1 Step 2
5. Turn the debris cap counterclockwise, and then pull the
debris cap and debris filter assembly out of the washer.
Debris
filter cap
6. Wash any dirt or other material from the debris filter.
7. Make sure the drain pump propeller behind the debris filter
is not blocked.
WF457ARG-03153A-07_EN.indd 56 2013-12-13 10:40:42