Samsung HG55NC890XFXZA - Manual (Page 8)

8
English
8 COMPONENT IN / AV IN
– Use to connect to Component video / audio devices such as DVD players and AV (Composite) devices such as VCRs.
– Connect audio cables to "R-AUDIO-L" on your TV and the other ends to corresponding audio out jacks on A/V or
Component devices.
– The COMPONENT IN jack is also used as the VIDEO 1 jack.
– Connect component video cables (not supplied) to the component jacks ("P
R
", "P
B
", "Y") on the rear of your TV and the
other ends to corresponding component video out jacks on a DVD player. Match the colors on the jacks and cables.
– If you want to connect both a Set-Top Box and a DVD player, you should connect the Set-Top Box to the DVD and
connect the DVD to the component jacks ("PR", "PB", "Y") on your TV.
– The PR, PB and Y jacks on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
– For AV devices, connect RCA audio cables (not supplied) to "R - AUDIO - L" on the rear of the TV set and the other
ends to corresponding audio out jacks on an external device.
– When your are connecting a composite (AV) device to AV IN1 [Y/Video] , connect the video cable (Yellow) to the
AV IN1 [Y/VIDEO] jack (Green/Yellow) .
9 VOL-CTRL : Used to control the volume of the Bathroom speaker. Connect the Bathroom Wall Box and the VOLCTRL port.
0 VARIABLE AUDIO OUT : Used for the audio output to the Bathroom speaker. Connect the Bathroom Wall Box and the
Variable port (RCA).
! DATA
– Used to support data communication between the TV and the SBB or STB.
– Connects using RJ-12 TV type plugs.
@ DVI AUDIO IN : Connects to the audio out jack of an external DVI device using a 1/8th inch stereo phone jack cable.
Some DVI devices may not or should not need this connection audio.
[HC890_ZA]Install_Guide_00ENG.indd 8 2014-04-02 1:39:13