Samsung LN55C630K1FXZA - Manual (Page 18)

18
English
Basic Features
sPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as a DVD player.
Audio Format ■ : During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
By connecting to 5.1ch speakers in a dolby
✎
digital setup, maximize your interactive 3D sound
experience.
Audio Delay ■ : Correct audio-video mismatch, when
watching TV or video, and listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
sound Reset (On / Off)
Reset all sound settings to the factory defaults.
Setup Menu
setting the Time ¦
MEnU
O
m → setup → Time → EnTER E
Time
The current time will appear every time you press the ✎
InFO button.
Clock ■ : Setting the clock is for using various timer
features of the TV.
If you disconnect the power cord, you have to set ✎
the clock again.
Clock Mode: Set up the current time manually or
automatically.
Auto – : Set the current time automatically using the
time from a digital channel.
The antenna must be connected in order to set ✎
the time automatically.
Manual – : Set the current time manually.
Depending on the broadcast station and signal,
✎
the auto time set up may not be correct. In this
case, set the time manually.
Clock set: Set the Month, Day, Year, hour, Minute
and am/pm.
Available only when
✎
Clock Mode is set to
Manual.
You can set the month, day, year, hour and minute
✎
directly by pressing the number buttons on the
remote control.
DsT (Off / On): Switches the DST(Daylight Saving Time)
function on or off.
This function is only available when the ✎ Clock
Mode is set to Auto.
Time Zone: Select your time zone.
This function is only available when the
✎
Clock
Mode is set to Auto.
Using the sleep Timer ¦
MEnU
O
m → setup → Time → sleep Timer →
EnTER E
sleep Timer ■
t : Automatically
shuts off the TV after a preset period
of time. (30, 60, 90, 120, 150 and 180
minutes).
To cancel the ✎ sleep Timer, select
Off.
setting the On/Off Timer ¦
MEnU
O
m → setup → Time → Timer 1 →
EnTER E
Timer 1 / Timer 2 / Timer 3 ■ : Three different on / off
timer settings can be made. You must set the clock first.
On Time / Off Time: Set the hour, minute, am/pm and
activate/inactivate. (To activate the timer with the setting
you have chosen, set to Activate.)
Volume: Set the desired volume level.
source: Select TV or UsB content to be played when
the TV is turned on automatically. (UsB can be selected
only when a USB device is connected to the TV)
Antenna (when the source is set to TV): Select Air or
Cable.
Timer 1
L Move U Adjust E Enter R Return
On Time
Off Time
Volume Source Antenna Channel
Repeat
Sun Mon Tue Wed Thu Fri Sat
Inactivate 12 00 am
Inactivate 12 00 am
10 TV Air 3
Once
▲
▼
P
POWER
FAV.CH
MEDIA.P
P.MODE
S.MODE
P.SIZE
CC
MTS
INFO
SLEEP
TOOLS
CH LIST
D
BN68-03164A_Eng.indb 18 2010-08-31 �� 9:37:22