Samsung SD-616QEP - Manual (Page 15)

Specifications
SAMSUNG continually strives to improve its products. Both the design specifications and these user
instructions are thus subject to change without notice.
Technical Specifications
ITEM
Model Name SD-616Q
ITEM DVD | CD
Disc
Disc types supported in
read mode DVD-ROM, DVD-R, DVD-RW, DVD-VIDEO, CD-DA(Audio), CD-ROM,
CD-ROM XA, CD-Plus, CD-Extra, Photo-CD (Single, Multi - session),
Video CD ready, Enhanced CD, CD-I/FMV, CD-R, CD-RW, CD-TEXT
Disc diameter 120mm or 80mm
DRIVE PERFORMANCE
Data transfer rate
Sustained : Max. 21,600KB/sec(16X) / Max. 7,200KB/sec (48X)
PIO mode 4 : 16.6MB/sec
Multiword DMA mode 2 : 16.6MB/sec
UDMA mode 2 : 33MB/sec
ACCESS TIME (typical) 115ms | 100ms
Data Buffer capacity 512KB
Laser Semiconductor laser
Slide mechanism Stepping motor
Spindle motor Brushless motor
Load mechanism Tray. DC motor (Soft Eject). Horizontal/Vertical.
ERROR RATE
ERROR RATE 10 -15 | Mode 1:10 -12 , Mode 2:10 -9
FRONT PANEL
Eject button Auto eject or Auto inject
Indicator(LED) BUSY
Headphone output Stereo mini-jack (Ø3.6mm) 0.60V ± 20%(rms) 33 ohm
Volume control Wheel Knob
REAR PANEL
Required power +5VDC: 2.0A, +12VDC : 1.0A
Interface connector ATAPI
Audio output Line out 0.7V ± 20%(rms) : 47Kohm
Jumper block Molex 70203 or other compatible models
OPERATING ENVIRONMENT
Operations Temperature: 5~45°C Humidity: 10~80%
Storage Temperature: -25~60°C Humidity: 10~90%
GENERAL
Dimensions 148.2 (W) x 42 (H) x 184 (D) mm (including bezel)
Net weight 740 g
RELIABILITY
MTBF 100,000 POH(Duty 25%)