Samsung LTM1555BX-XAA - Manual (Page 47)

5.3
Adjusting the Screen Quality
The purpose of picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by fine tuning alone, then do the frequency adjustments to
the utmost and fine tune again. After the noise has been reduced, re-adjust the picture so
that it is aligned on the center of screen.
Press the PC button on the remote control to select the PC mode.
1
Press the MENU button to
display the menu.
Press the CH ▼ button to
select “PC”, then press
the VOL + button.
P C
M o v e S e l e c t E x i t
Image
Image lock
Position
Color adjust
Recall
1024x768 48.3kHz 59.9Hz
3
Press the CH ▼ button to
select “Coarse” or “Fine”.
Press the VOL + or VOL -
button to adjust the
screen quality, vertical
stripes appear or the pic-
ture may be blurry.
P C
M o v e S e l e c t E x i t
Image lock
Coarse
Fine
2
Press the CH ▼ button to
select “Image lock”, then
press the VOL + button. P C
M o v e S e l e c t E x i t
Image
Image lock
Position
Color adjust
Recall
1024x768 48.3kHz 59.9Hz
4
When you are satisfied with the settings, press the MENU but-
ton repeatedly to return to normal viewing.
P C D
I S P L AY
C o a r s e
1 0 4 3
A d j u s t E x i t M o v e
F i n e
5 0
A d j u s t E x i t M o v e