Freezing the current picture – Samsung HPT5044X-XAA User Manual

Page 34

English - 34

Changing the Position of the PIP Window
4 Press the ▲ or ▼ button to select Position, then press the ENTER button. Press

the ▲ or ▼ button to select the desired PIP window position, then press the

ENTER button.

➢

In Double Window ( ) and Double Wide ( ) modes, Position cannot be

selected.

➢

If the PIP window is set to Double Window ( ) or Double Wide ( )

mode, the screen size or alignment may slightly differ depending on the signal

type.

Changing the PIP Channel
5 Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press

the ▲ or ▼ button at the bottom of the remote to select the desired channel in the

PIP window, then press the

ENTER button.

➢

The channel can be active when the sub picture is set to TV.

Press the

EXIT button to exit.

Press the

PIP CH

and

and buttons on the remote control to change the PIP

channel.

Freezing the Current Picture

1 Press the STILL button to freeze a moving picture.

➢

Normal sound will still be heard. Press again to cancel.

➢

To prevent screen burn-in, this function will automatically cancel after 5

minutes.

➢

While V-Chip is in operation, the Still function cannot be used.

PIP

: On

Size

Position

Channel

: Air 3

PIP

T V

Enter

Move

Return

PIP