Samsung EC-L77ZZBBA-AU - Manual (Page 48)

《47》
● [LCD save] sub menu
[Off]: The LCD monitor will not be turned off.
[On]: If you select the [LCD Save] and the camera
isn't operated during the specified time(about
30 SEC.), the camera power will be idle(LCD
monitor : OFF, Camera status lamp :
Blinking) automatically. To use the camera
again, press any of the camera buttons
except the power button.
[ LCD save ]
■ If you set the [LCD save] to On and the camera isn't operated during the
specified time, the LCD monitor will be turned off automatically.
● After replacing the battery or connect the AC adapter again, the poweroff
setting will be preserved.
● Note that the LCD save function will not operate if the camera is in PC /
Printer mode, slide show and playing back a movie clip.
INFORMATION
Setup 2 ( )
[ Selecting Video out type ]
■ The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV,
etc.) to which the camera is connected. PAL mode can support only BDGHI.
Yellow - Video
White - sound
■ Connecting to an external monitor
● When the camera is connected to an external
monitor in the recording mode or play back mode,
the image (movie or still image) will be visible on
the external monitor and the LCD monitor of the
camera turns off.
Quick View
SETUP2
Video Out On
Off
Power Off
LCD Save
Format
Reset
Back Set ◀ O OK K
Quick View
SETUP2
LCD Save
Video Out NTSC
PAL
Power Off
Format
Reset
Back Set ◀ O OK K