Samsung HG40NC690DFXZA - Manual (Page 41)

41
English
When you press the TOOLS button, the following menu is available.
a 2 ----- (Cable) a 10 CW
a 3 ----- (Cable) Air 10-1 CW DTV
a 4 ----- (Cable) a 11 HBO
a 5 ----- (Cable) Air 11-1 HBO DTV
a 6 ----- (Cable) a 12 NBC
a 7 ABC Air 12-1 NBC DTV
Air 7-1 ABC a 13 ----- (Cable)
a 8 FOX a 14 CNN
Air 8-1 FOX DTV Air 15 ----- (Cable)
a 9 ----- (Cable) a 16 TNT
All
Channel
a Delete b Select All } Video Mute On ` Information U Page E Select T Tools R Return
TOOLS
Edit Channel Number
Rename Channel
Information
R Return
y Edit Channel Number
Use Edit Channel Number to change the channel number of a channel you select.
To change a channel number, follow these steps:
1. Select a channel on the Channel Edit screen.
2. Press the
TOOLS button on your remote.
3. Select Edit Channel Number in the Tools menu.
4. Use the up or down arrow keys to change the channel number.
5. Select OK when done, and then press the
ENTER E button.
✎ When you change the channel number, the channel information is not updated automatically.
Edit Channel Number
ABC HD_
U Adjust E Space R Return
Ok
Cancel
4
y Rename Channel
Use Rename Channel to change the name of a channel you select.
To change the name of a channel, follow these steps:
1. Select a channel on the Channel Edit screen.
2. Press the
TOOLS button on your remote.
3. Select Rename Channel in the Tools menu.
4. Use the on-screen keyboard that appears to enter the new name for the channel. Use the arrow
buttons on your remote to select a letter or number, and then press Enter. Repeat for each letter
or number you want to select.
5. When finished, select Done on the bottom of the screen, and then press the ENTER E button.
Rename Channel
Enter new name for CH 4 (Max Length = 24)
ABC HD_
a Delete { Space R Return
Done Cancel
a b c d e f 1 2 3
g h i j k l 4 5 6
m n o p q r 7 8 9
s t u v w x y z 0
A/a  Space ◄ ►
y Information
Use Information to view information about a channel you select.
To view information about a channel, follow these steps:
1. Select a channel on the Channel Edit screen.
2. Press the
TOOLS button on your remote.
3. Select Information in the Tools menu.
4. Select OK, and then press the
ENTER E button to close the Information screen.
Information
OK
[HC690_ZA]Install_Guide_00ENG.indd 41 2014-03-21 1:25:53