Powersaver, Display modes – Samsung AV17KSBL User Manual
Page 12
English - 10
PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves
energy by switching your monitor into a low-power mode when it has not been used for a
certain amount of time. The monitor automatically returns to normal operation when you
move the computer's mouse or press a key on the keyboard. For energy conservation, turn
your monitor OFF when it is not needed, or when leaving it unattended for long periods. The
PowerSaver system operates with a VESA DPMS compliant video card installed in your
computer. Use a software utility installed on your computer to set up this feature.
NOTE: This monitor is EPA Energy Star® compliant and NUTEK compliant when used with a computer
equipped with VESA DPMS functionality.
Display Modes
State
Normal Operation
Power Saving function mode EPA/NUTEK
Standby mode
Suspend mode
Position A1
Power-off Mode
Position A2
Power
Indicator
Green
Green, Blinking
(0.5 sec. interval)
Green, Blinking
(0.5 sec. interval)
Green, Blinking
(1 sec. interval)
Power
Consumption
S/M 753DF
90 W (Maximum)
75 W (Nominal)
S/M 755DF
100 W (Maximum)
90 W (Nominal)
55 W (Nominal)
Less than 15 W
Less than 3 W
Display Mode
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel
Clock
(MHz)
Sync.
Polarity
(H/V)
IBM, VGA2, 720 x 400
IBM, VGA3, 640 x 480
VESA, 640 x 480 (S/M 753DF)
VESA, 640 x 480
VESA, 800 x 600
VESA, 800 x 600
VESA, 1024 x 768
VESA, 1024 x 768
VESA, 1280 x 1024 (S/M 755DF)
31.469
31.469
37.500
43.269
46.875
53.674
60.023
68.677
79.976
70.087
59.940
75.000
85.008
75.000
85.061
75.029
84.997
75.025
28.322
25.175
31.500
36.000
49.500
56.250
78.750
94.500
135.000
–/+
–/–
–/–
–/–
+/+
+/+
+/+
+/+
+/+
753DF.book Page 10 Thursday, February 3, 2000 10:43 AM