Samsung EC-S860ZSBA-US - Manual (Page 62)

04 PLAY
61 PLAY_
Starting the Multi Slide Show ( ❸ )
You can select image to view
1. Use the Up / Down buttons to select the
[Image] menu and press the Right button.
2. Select a desired sub menu by pressing
the Up / Down button.
[All] : All images saved in the Memory
are played back.
[Date] : Images taken in a specified date
are played back.
[Select] : Play only the selected images.
If you press the Right button, you can select the desired
images to play back.
The selected image can be saved as [Select1], [Select2]
and [Select3]. If you save the selected image with the [New
Select] command, it will be saved as [Select1].
But when a new image is saved again using [New Select],
the former image which had been saved as [Select1] will
be saved as [Select2] automatically.
You can change and cancel the images which were saved
as [Select1], [Select2] and [Select3].
3. Press the OK button and the settings are saved.
Selecting Images
Unique screen effects can be used for the Multi Slide Show.
1. Select the [Effect] sub menu by press-
ing the UP / DOWN button and press the
RIGHT button.
2. Use the Up / Down button to select the
type of effect.
[Off] : No effect.
[Basic] : Fade In/Out effect is added
and the Images are displayed at set interval.
[Classic] : You can add noise to the image to give a classic feel.
[Memories] : Scratches are added to give an old movie effect.
[Rhythmic] : Images are displayed with a special effect.
[Delight] : Images are displayed with a special effect.
3. Press the OK button to confirm the setting.
Configure Multi Slide Show effects
MULTI SLIDE SHOW
Interval
Show
Basic
Off
Effect
Image
Music
Back Set OK
Memories
Classic
Rhythmic
Delight
MULTI SLIDE SHOW
Interval
Show
All Image
Effect
Music
Back Set OK
Select
Date