Samsung MJ17MSTBV - Manual (Page 27)

Attaching a base
This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad.
Simple stand Pivot stand
A. Monitor
B. Mounting interface pad
1. Turn off your monitor and unplug its power cord.
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the
screen.
3. Remove four screws and then remove the Stand from the LCD monitor.
4. Align the Mounting Interface Pad with the holes in the Rear Cover Mounting Pad and secure
it with four screws that came with the arm-type base, wall mount hanger or other base.