Samsung UN46EH5000FXZA User Manual

Page 2

PTP device is not supported.

If an over-power warning message is displayed while you are

connecting or using a USB device, the device may not be

recognized or may malfunction.

If the TV has no input during the time set in Auto Protection Time,

the Screensaver will run.

The power-saving mode of some external hard disk drives may be

released automatically when your connect them to the TV.

If you use a USB extension cable, the TV may not recognize the

USB device or may not be able to read the files on the device.

If a USB device connected to the TV is not recognized, the list of

files on the device is corrupted, or a file in the list is not played,

connect the USB device to a PC, format the device, and check the

connection.

If a file you deleted from the PC is still found when you run Media

Play, use the “Empty the Recycle Bin” function on the PC to

permanently delete the file.

Photos only supports sequential jpeg format.

The scene search and thumbnail functions are not supported in the

Videos.

If the number of files and folders saved on a USB storage device is

approximately over 4000, the files and folders may not appear and

some folders may not be opened.

The maximum displayed number of files, including sub folders, in

one folder of USB storage device is 2000.

The media may not be playing smoothly when using the device

lower than USB 2.0.

Videos

►

1/1

Movie 01.avi

E Pause L Jump T Tools R Return

1. Press the

◄ or ► button to select Videos, then press the

ENTER

E button in the Media Play menu.

2. Press the

◄/►/▲/▼ button to select the desired video in the file

list.

3. Press the

ENTER

E button or � (Play) button.

The selected file is displayed on the top with its playing time.

If video time information is unknown, playing time and the

progress bar are not displayed.

During video playback, you can search using the

◄ and ►

button.

✎

In this mode, you can play movie clips contained in a game, but

you cannot play the game itself.

Supported Subtitle Formats

External

Name

File extension

MPEG-4 timed text

.ttxt

SAMI

.smi

SubRip

.srt

SubViewer

.sub

Micro DVD

.sub or .txt

SubStation Alpha

.ssa

Advanced SubStation Alpha

.ass

Internal

Name

Container

Format

Xsub

AVI

Picture Format

SubStation Alpha

MKV

Text Format

Advanced SubStation

Alpha

MKV

Text Format

SubRip

MKV

Text Format

MPEG-4 Timed text

MP4

Text Format

Supported Video Formats

File

Extension

Container

Video Codec

Resolution

Frame

rate(fps)

Bit

rate(Mbps)

Audio

Codec

*.mp4

MP4

DivX

3.11/4.x/5.1/6.0

1920x1080

6~30

30Mbps

MP3 /

ADPCM /

AAC

H264

1920x1080

6~30

30Mbps

AVC

1920x1080

6~30

30Mbps

MJPEG

640x480

6~30

10Mbps

*.avi

*.mkv

AVI,

MKV

DivX

3.11/4.x/5.1/6.0

1920x1080

6~30

30Mbps

MP3 /
AC3 /

LPCM /
ADPCM

/ DTS

Core

MPEG4 SP / ASP

1920x1080

6~30

30Mbps

H264

1920x1080

6~30

30Mbps

MJPEG

640x480

6~30

10Mbps

*.asf

*.wmv

ASF

DivX 3.11 / 4.x

/5.1 / 6.0

1920x1080

6~30

30Mbps

MP3 /
AC3 /

LPCM /
ADPCM
/ WMA /

WMA Pro

MPEG4 SP / ASP

1920x1080

6~30

30Mbps

H.264

1920x1080

6~30

30Mbps

*.ts

*.trp
*.tp

*.m2ts

MPEG2

1920x1080

6~30

30Mbps

AC3 /
AAC /
MP3 /
DD+ /

HE-AAC

H. 264 BP / MP

/ HP

1920x1080

6~30

30Mbps

*.dat

*.mpg

*.mpeg

*.vob

MPEG1

1920x1080

24/25/30

30Mbps

AC3 /

MPEG /
LPCM /

AAC

MPEG2

1920x1080

24/25/30

30Mbps

H. 264 BP / MP

/ HP

1920x1080

6~30

30Mbps

*.3gp

3GPP

MPEG4 SP / ASP

1920x1080

6~30

30Mbps

MP3

H.264

1920x1080

6~30

30Mbps

*.flv

*.swf

flash

formats

H.264

1920x1080

6~30

30Mbps

MP3

Sorenson H.263

1920x1080

6~30

30Mbps

Other Restrictions

Video content will not play, or not play correctly, if there is an error in the
content or the container.

Sound or video may not work if the contents have a standard bit rate/
frame rate above the compatible Frame/sec listed in the table above.

If the Index Table is in error, the Seek (Jump) function is not supported.

The menu may take longer to appear if the video’s bit rate exceeds
10Mbps.

Video content can not be played, if there are many contents in one file.

Video Decoder
Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
MPEG4 SP, ASP :
– Below 1280 x 720: 60 frame max
– Above 1280 x 720: 30 frame max
H.263 is not supported.
GMC is not support.

Audio Decoder
Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO
WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode of WMA

Pro is not supported)
WMA Lossless is not supported.

Caption on the TV menu is greyed out.

• You cannot select Caption in the TV menu when watching content from a device connected via HDMI or

Component.

• Caption must be activated on the external device.

There is a plastic smell from the TV.

• This smell is normal and will dissipate over time.

TV Signal Strength is unavailable in the

Self Diagnosis Test menu.

• This function is only available for digital channels from an Antenna / RF/Coax connection.

TV is tilted to the right or left side.

• Remove the stand base from the TV and reassemble it.

The Channel menu is grey out

(unavailable).

• The Channel menu is only available when you select the TV source.

Your settings are lost after 30 minutes or

every time the TV is turned off.

• If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from

Store Demo mode to Home Use mode using the Plug & Play procedure. Press the

SOURCE

button to select

TV mode, go to

→ Setup → Plug & Play →

ENTERE

You have intermittent loss of audio or

video.

• Check the cable connections and reconnect them.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible

enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree

connectors.

You see small particles when you look

closely at the edge of the frame of

the TV.

• This is part of the product’s design and is not a defect.

POP (TV’s internal banner ad) appears

on the screen.

• Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).

✎

This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark

pixels on the screen. These pixels will have no impact on the performance of the product.

✎

Watch these troubleshooting on video at www.samsung.com/spsn.

✎

Some functions and pictures shown in this manual are available on specific models only.

✎

You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com

→ Support → Downloads) by USB.

Storage and Maintenance

✎

If you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it to watch TV.

✎

The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a soft cloth to prevent

scratches.

Do not spray water directly onto the product.
Any liquid that goes into the product may
cause a failure, fire, or electric shock.

Clean the product with a soft cloth dampened
with in a small amount of water. Do not use a
flammable liquid (e.g. benzene, thinners) or a
cleaning agent.

License

TheaterSound, SRS and the

symbol are trademarks of SRS

Labs, Inc.

TheaterSound technology is incorporated under licence from
SRS Labs, Inc.

SRS TheaterSound™ provides the most immersive surround sound experience from the TVs built-in
speakers, while maintaining steady volume and delivering rich bass and clear dialog.

DivX Certified® to play DivX® video up to HD 1080p, including
premium content.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx. com for more
information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD)
movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go
to vod. divx.com for more information on how to complete your registration. Covered by one or more of
the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274 DivX®, DivX Certified® and
associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent Nos: 5,956,674;
5,974,380; 6,487,535 & other U.S. and worldwide patents issued
& pending. DTS, the Symbol, & DTS and the Symbol together
are registered trademarks & DTS 2.0+Digital Out is a trademark
of DTS, Inc. Product includes software.

Reserved.

The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.

Open Source License Notice

Open Source used in this product can be found on the following webpage. (http://opensource.samsung.
com) Open Source License Notice is written only English.

To send inquiries and requests for questions regarding open sources, contact Samsung via Email (oss.

[email protected]).
■ This product uses some software programs which are distributed under the Independent JPEG

Group.
ICU License - ICU 1.8.1 and later
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1995-2008 International Business Machines Corporation and others All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and

associated documentation files (the "Software"), to deal in the Software without restriction, including

without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the

Software, and to permit persons to whom the Software is furnished to do so, provided that the above

above copyright notice(s) and this permission notice appear in supporting documentation.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT

SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR

ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES

WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF

CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION

WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or

otherwise to promote the sale, use or other dealings in this Software without prior written authorization

of the copyright holder.
All trademarks and registered trademarks mentioned herein are the property of their respective owners.

There is poor color or brightness.

• Adjust the Picture options in the TV menu. (go to Picture Mode / Color / Brightness / Sharpness)
• Adjust Energy Saving option in the TV menu. (go to

- Setup - Eco Solution - Energy Saving )

• Try resetting the picture to view the default picture setting. (go to

- Picture - Picture Reset)

There is a dotted line on the edge of

the screen.

• If the picture size is set to Screen Fit, change it to 16:9.
• Change cable/satellite box resolution.

The picture is black and white.

• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1

on the TV.

When changing channels, the picture

freezes or is distorted or delayed.

• If connected to a cable box, please try to reset it. (reconnect the AC cord and wait until the cable box reboots. It

may take up to 20 minutes)

• Set output resolution of the cable box to 1080i or 720p.

Sound Problem

First of all, please perform the Sound Test to confirm that your TV audio is properly operating.
(go to

- Support - Self Diagnosis - Sound Test)

If the audio is OK, the sound problem may caused by the source or signal.

There is no sound or the sound is too

low at maximum volume.

• Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.

The picture is good but there is no

sound.

• If you are using an external device, check the device’s audio output option (ex. you may need to change your

cable box’s audio option to HDMI when you have a HDMI connected to your TV).

• Reboot the connected device by reconnecting the device’s power cable.

The speakers are making an

inappropriate noise.

• Check the cable connections. Make sure a video cable is not connected to an audio input.
• For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.
• Perform the Sound Test as explained above.

No Picture, No Video

The TV will not turn on.

• Make sure the AC power cord is securely plugged into the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the

POWER

button on the TV to make sure the problem is not the remote.

If the TV turns on, refer to ‘Remote control does not work’ below.

The TV turns off automatically.

• Ensure the Sleep Timer is set to Off in the Time menu.
• If your PC is connected to the TV, check your PC power settings.
• Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
• When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes

if there is no signal.

There is no picture/video.

• Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).
• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV

input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.

• Make sure your connected devices are powered on.
• Be sure to select the TV’s correct source by pressing the

SOURCE

button on the remote control.

• Reboot the connected device by reconnecting the device’s power cable.

RF(Cable/Antenna) Connection

The TV is not receiving all channels.

• Make sure the coaxial cable is connected securely.
• Please try Auto Program to add available channels to the channel list.

go to

- Channel - Auto program then select Auto and make sure the correct Cable TV signal type is set

in the menu. There are 3 options. (STD, HRC and IRC)

• Verify the antenna is positioned correctly.

No Caption on digital channels.

• Check the Caption Setup menu. Try changing Caption Mode Service 1 to CC1.
• Some channels may not have caption data.

The picture is distorted: macroblock,

error, small block, dots, pixelization.

• Compression of video contents may cause picture distortion. Especially on fast moving pictures such as sports

and action movies.

• A weak signal can cause picture distortion. This is not a TV problem.

Others

Purple/green rolling horizontal bars and

buzzing noise from the TV speakers with

Component cable connection.

• Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the set-

top-box has a grounding issue. Replace the Component video cables with an HDMI connection.

The picture will not display in full screen.

• HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
• Black bars on the Top & Bottom will be shown on movies that have aspect ratios different from your TV.
• Adjust the picture size option on your external device or change the TV to full screen.

The remote control does not work.

• Replace the remote control batteries with correct polarity (+/–).
• Clean the transmission window located on the top of the remote control.
• Try pointing the remote directly at the TV from 5~6 feet away.

The cable/set top box remote control

does not turn the TV on or off, or adjust

the volume.

• Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for

the SAMSUNG TV code.

A “Mode Not Supported” message

appears.

• Check the supported resolution of the TV and adjust the external device’s output resolution accordingly. Refer to

resolution settings in this manual.

Other Information

Installing the Wall Mount Kit

The wall mount kit (sold separately) allows you to mount the TV on

the wall.
For detailed information on installing the wall mount, see the

instructions provided with the wall mount items. Contact a

technician for assistance when installing the wall mount bracket.

Samsung Electronics is not responsible for any damage to the

product or injury to yourself or others if you elect to install the wall

mount on your own.

Wall Mount Kit Specifications (VESA)

✎

The wall mount kit is not supplied, but sold separately.

Install your wall mount on a solid wall perpendicular to the floor.

When attaching to other building materials, please contact your

nearest dealer. If you install the TV on a ceiling or slanted wall, it

may fall and result in severe personal injury.

✎

NOTE

Standard dimensions for wall mount kits are shown in the table

below.

When purchasing our wall mount kit, a detailed installation

manual and all parts necessary for assembly are provided.

Do not use screws that do not comply with the VESA standard

screw specifications.

Do not use screws that are longer than the standard dimension

or do not comply with the VESA standard screw specifications.

Screws that are too long may cause damage to the inside of the

TV set.

For wall mounts that do not comply with the VESA standard

screw specifications, the length of the screws may differ

depending on the wall mount specifications.

Do not fasten the screws too firmly. This may damage the

product or cause the product to fall, leading to personal injury.

Samsung is not liable for these kinds of accidents.

Samsung is not liable for product damage or personal injury

when a non-VESA or non-specified wall mount is used or the

consumer fails to follow the product installation instructions.

Do not mount the TV at more than a 15 degree tilt.

Always have two people mount the TV on a wall.

Product

Family

TV size in

inches

VESA screw hole specs

(A * B) in millimeters

Standard

Screw

Quantity

LED-TV

19~22

75 X 75

100 X 100

32~40

200 X 200

46~60

400 X 400

Do not install your Wall Mount Kit
while your TV is turned on. It may
result in personal injury due to electric
shock.

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing onto the TV

may cause the TV to fall. In particular, ensure that your

children do not hang over or destabilize the TV; doing

so may cause the TV to tip over, resulting in serious

injuries or death. Follow all safety precautions provided

on the included Safety Flyer. For added stability, install

the anti-fall device for safety purposes, as follows.

To prevent the TV from falling

✎

Since the necessary clamps, screws, and string are not

supplied, please purchase these additionally.

1. Drive the screws into the clamps and firmly fasten them onto the

wall. Make sure the screws are firmly fixed into the wall.

2. Remove the screws from the back center of the TV, put the

screws into the clamps, and then fasten the screws onto the TV

again.

3. Connect the clamps fixed onto the TV and the clamps fixed onto

the wall with a strong cable and then tie the string tightly.

✎

Verify all connections are properly secured. Periodically check

the connections for any sign of fatigue or failure. If you have

any doubt about the security of your connections, contact a

professional installer.

✎

Install the TV close to the wall so that it does not fall.

✎

It is safe to connect the string so that the clamps fixed on the

wall are equal to or lower than the clamps fixed on the TV.

Untie the string before moving the TV.

Kensington Lock

The Kensington Lock is not supplied by Samsung. It is a device

used to physically fix the system when using it in a public place.

Refer to the manual provided with the Kensington Lock for

additional information on proper use.

✎

Please find a “K” icon on the rear of the TV. The Kensington

slot is beside the “K” icon.

✎

The position and color may differ depending on the model.

Assembling the Cable manager

Troubleshooting

If the TV seems to have a problem, first review this list of possible problems and solution. If none of these troubleshooting tips apply, visit

samsung.com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.

Problem

Possible Solution

Flickering and Dimming

If your Samsung Television is flickering or dimming sporadically, you may need to disable some of its energy efficient

features like the Eco Sensor or the Energy Saving feature. If you follow below step with your remote, you can turn

these features off or on.

Energy saving : User Menu

→ Setup → Eco Solution → Energy Saving

Eco Sensor : User Menu

→ Setup → Eco Solution → Eco Sensor

Component Connections /
Screen Color

If you find that the color on your Samsung television’s screen is not correct or black and White, first run a Self

Diagnosis on the TV to make sure there are no device issues.

Self Diagnosis : User Menu

→ Support → Self Diagnosis → Picture Test

If the test is ok, try making sure ;

Your connections are all consistent. For example, if you’ve used the AV In jack on your TV, make sure you have

used the AV Out jack on your video source.

Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled

Pb, Pr, and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the

video source to the blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV.

Screen Brightness

If you find that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings

you should check before calling for a repair.

Backlight, Contrast, Brightness, Sharpness, Color, Tint and so on. Go in to “Picture” on user Menu then try

adjusting options mentioned above.

Unwanted Powering off

If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco

friendly No Signal Power Off feature.
First make sure you Sleep Timer is not accidentally set. The sleep timer allows you the comfort of falling asleep with

the TV still on but, turns it off after a certain period of time so as not to waste energy.

Sleep Timer : User Menu

→ Setup → Time → Sleep Timer

If the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.

No Signal Power Off : User Menu

→ Setup → Eco Solution → No Signal Power

Auto Power Off : User Menu

→ Setup → Eco Solution → Auto Power Off

Trouble Powering On

Before Turn on check red light on the right or left bottom of your TV. Press power on button on TV or remote

and it will blink about 5 times before turning on.
If you find that you are having trouble powering on your Samsung television, there are a number of things to check

before making a call to the service department.

If you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you
press the power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your
keyboard or move the mouse. Then try turning your TV on.

If you’re sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If

you have a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a

signal. To test the signal output of your cable or satellite box, press the guide or info button on the cable or satellite

box remote control. If the screen displays the guide or info data, the problem is caused by the box.

Stand Assembly

• If you have any trouble to assemble the stand though you refer to “Install the Stand” mentioned at separate guide.

Cannot find channel

• Re-run plug and play.

Poor picture

First, perform the Picture Test and to see if your TV is properly displaying the test image.
Go to

- Support - Self Diagnosis - Picture Test

If the test image is properly displayed, the poor picture may be caused by the source or signal.

The TV image does not look as good as

it did in the store.

• If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to

deliver HD (high definition) picture quality.

• Cable/Satellite subscribers: Try HD channels from the channel line up.
• Air/Cable Antenna connection: Try HD channels after performing Auto program.

✎

Many HD channels are up scaled from SD(Standard Definition) contents.

• Adjust the Cable/Set top box video output resolution to 1080i or 720p.

The picture is distorted: macroblock

error, small block, dots, pixelization.

• Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports

and action movies.

• A weak signal can cause picture distortion. This is not a TV problem.
• Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.

Color is wrong or missing.

• If you’re using a component connection, make sure the component cables are connected to the correct jacks.

Incorrect or loose connections may cause color problems or a blank screen.

- 10 -

- 9 -

- 14-

- 13 -

- 11 -

- 15 -

- 12 -

- 16 -

Eco Solution

■

Energy Saving (Off / Low / Medium / High / Picture Off) :

This adjust the brightness of the TV in order to reduce power

consumption. If you select Picture Off, the screen is turned

off, but the sound remains on. Press any button except volume

button to turn on the screen.

■

Eco Sensor (Off / On)

for LED 5000 series

: To enhance your power

savings; the picture settings will automatically adapt to the light

in the room.

✎

If you adjust the Backlight, the Eco Sensor will be set to

Off.

Min. Backlight: When Eco Sensor is On, the minimum screen

brightness can be adjusted manually.

✎

If Eco Sensor is On, the display brightness may change

(become slightly darker in most cases) depending on the

surrounding light intensity.

■

No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets

how quickly the TV switches to standby mode, if no picture is

being received.

✎

Disabled when the PC is in power saving mode.

■

Auto Power Off (Off / On): The TV will be automatically turned

off when no user operation is received for 4 hours.

Support Menu

Self Diagnosis

■

Picture Test: Use to check for picture problems. If the problem

continues to occur, check the color pattern.

■

Sound Test: Use the built-in melody sound to check for sound

problems.

■

Signal Strength: (digital channels only) An HD channel’s

reception quality is either perfect or the channels are unavailable.

Adjust your antenna to increase signal strength.

■

Reset: Reset all settings to the factory defaults.

✎

The PIN input screen appears before the setup screen.

✎

Enter your 4-digit PIN. Change the PIN using the Change

PIN option.

Software Upgrade

Software Upgrade can be performed by downloading the latest

firmware from samsung.com to a USB memory device.

HD Connection Guide

Refer to this information when connecting external devices to the

TV.

Contact Samsung

View this information when your TV does not work properly or

when you want to upgrade the software. You can find information

regarding our call centers and how to download products and

software.

Media Play

Enjoy photos, music and/or movie files saved on a

USB Mass Storage Class (MSC) device.

POWER

MEDIA.P

❑

Connecting a USB Device

1. Turn on your TV.
2. Connect a USB device containing photo, music and/or movie

files to the USB jack on the side of the TV.

3. When USB is connected to the TV, you can select Media Play

(USB) in Application menu.

❑

Using the Media Play Menu

SUM

▒ Change Device

E Enter R Return

Media Play

Videos

1. Press the

button. Press the

▲ or ▼ button to select

Application, then press the

ENTER

E button.

2. Press the

▲ or ▼ button to select Media Play (USB), then

press the

ENTER

E button.

3. Press the

◄ or ► button to select an icon (Videos, Music,

Photos, Settings), then press the

ENTER

E button.

✎

It might not work properly with unlicensed multimedia files.

✎

Need-to-Know List before using Media Play (USB)

The file system supports FAT16, FAT32 and NTFS.

Certain types of USB Digital camera and audio devices may not

be compatible with this TV.

Media Play only supports USB Mass Storage Class (MSC)

devices. MSC is a Mass Storage Class Bulk-Only Transport

device. Examples of MSC are Thumb drives and Flash Card

Readers. Devices should be connected directly to the TV’s USB

port. USB HDD is not supported.

Before connecting your device to the TV, please back up your

files to prevent them from damage or loss of data. SAMSUNG is

not responsible for any data file damage or data loss.

A USB device that requires high power (more than 0.5A) may not

be supported.

Do not disconnect the USB device while it is loading.

The higher the resolution of the image, the longer it takes to

display on the screen.

The maximum supported JPEG resolution is 15360 x 8640 pixels.

If a file is corrupted or the TV does not support the file type, the

“Not Supported File Format” message appears.

The TV cannot play MP3 files with DRM that have been

downloaded from a for-pay site. Digital Rights Management

(DRM) is a technology that supports the creation, distribution,

and management of digital content in an integrated and

comprehensive way, including protecting the rights and interests

of content providers, preventing illegal copying of contents, and

managing billings and settlements.

Specifications

Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity

50°F to 104°F (10°C to 40°C)

10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C )

5% to 95%, non-condensing

Model Name

UN26EH4000 / UN26EH4050

UN32EH4000 / UN32EH4050

UN32EH5000 / UN32EH5050

UN37EH5000

Display Resolution

1366 x 768

1920 x 1080

Screen Size
(Diagonal)

26" Class

(26.0" measured diagonally)

32” Class

(31.5" measured diagonally)

32" Class

(31.5" measured diagonally)

37" Class

(37.0" measured diagonally)

Sound
Output

5W x 2

10W x 2

Dimensions (W x D x H)
Body

With stand

24.2 X 3.6 X 14.3 inches

(615.1 X 93.3 X 365.6 (mm))

24.2 X 7.1 X 16.5 inches

(615.1 X 180.7 X 419.2 (mm))

29.0 X 3.6 X 17.1 inches

(738.8 X 93.3 X 436.7 (mm))

29.0 X 7.5 X 19.4 inches

(738.8 X 191.7 X 493.3 (mm))

29.0 X 3.6 X 17.5 inches

(738.3 X 93.2 X 444.9 (mm))

29.0 X 7.5 X 19.6 inches

(738.3 X 191.7 X 498.2 (mm))

34.1 x 3.6 x 20.4 inches

(866.5 x 93.0 x 519.2 (mm))

34.1 x 8.9 x 22.6 inches

(866.5 x 227.6 x 575.5 (mm))

Weight
Without Stand
With Stand

9.2 Ibs (4.2 kg)

10.3 Ibs (4.7 kg)

12.5 Ibs (5.7 kg)
13.8 Ibs (6.3 kg)

13.0 Ibs (5.9 kg)
14.5 Ibs (6.6 kg)

17.6 lbs (8.0 kg)

22.2 lbs (10.1 kg)

Model Name

UN40EH5000 / UN40EH5050

UN46EH5000 / UN46EH5050

UN50EH5000 / UN50EH5050 /

UN50EH5070

Display Resolution

1920 x 1080

Screen Size
(Diagonal)

40" Class

(40.0" measured diagonally)

46" Class

(45.9" measured diagonally)

50" Class

(49.5" measured diagonally)

Sound
Output

10W x 2

Dimensions (W x D x H)
Body

With stand

36.5 X 3.6 X 21.6 inches

(927.6 X 93.0 X 551.0 (mm))

36.5 X 8.9 X 23.8 inches

(927.6 X 227.6 X 606.5 (mm))

41.7 X 3.7 X 24.6 inches

(1059.8 X 94.3 X 625.6 (mm))

41.7 X 8.9 X 26.7 inches

(1059.8 X 227.6 X 680.7 (mm))

44.7 X 3.7 X 26.3 inches

(1137.6 X 94.5 X 669.4 (mm))

44.7 X 8.9 X 28.5 inches

(1137.6 X 227.6 X 725.0 (mm))

Weight
Without Stand
With Stand

19.8 Ibs (9.0 kg)

24.2 Ibs (11.0 kg)

27.5 Ibs (12.5 kg)
31.9 Ibs (14.5 kg)

34.6 Ibs (15.7 kg)
40.3 Ibs (18.3 kg)

✎

Design and specifications are subject to change without prior notice.

✎

This device is a Class B digital apparatus.

✎

For information about power supply, and more about power consumption, refer to the label attached to the product.

✎

Typical power consumption is measured according to Energy Star Program requirements for Televisions.

✎

Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/

recyclingdirect or call, (877) 278-0799.

■

JACK PANEL DETAIL / REAR VIEW

(Unit: inches)

Model name

UN26EH4000 / UN26EH4050

5.4

3.6

2.8

13.9

3.9

UN32EH4000 / UN32EH4050

7.4

3.4

1.9

18.9

7.8

UN32EH5000 / UN32EH5050

7.4

3.4

4.2

19.0

7.8

UN37EH5000

8.7

5.1

5.7

22.4

7.8

UN40EH5000 / UN40EH5050

9.6

5.8

6.2

24.1

7.8

UN46EH5000 / UN46EH5050

11.6

5.2

7.7

29.8

15.7

UN50EH5000 / UN50EH5050 / UN50EH5070

12.5

6.7

8.5

31.3

15.7

NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing
installation of your TV. Not responsible for typographical or printed errors.
© 2012 Samsung Electronics America, Inc

Music

3/15

I Love you

Jhon
Music 1

No Singer
Music 2

No Singer
Music 3

No Singer
Music 4

No Singer
Music 5

No Singer

I Love You

Jhon

1st Album

Pop

2010

4.2MB

01:10 / 04:02

SUM

E Pause L Jump T Tools R Return

Playlist

1. Press the

◄ or ► button to select Music, then press the

ENTER

E button in the Media Play menu.

2. Press the

◄/►/▲/▼ button to select the desired Music in the file

list.

3. Press the

ENTER

E button or � (Play) button.

✎

During music playback, you can search using the

◄ and ►

button.

✎

� (REW) and μ (FF) buttons do not function during play.

✎

Only displays the files with MP3 and PCM file extension. Other

file extensions are not displayed, even if they are saved on the

same USB device.

✎

If the sound is abnormal when playing MP3 files, adjust the

Equalizer in the Sound menu. (An over-modulated MP3 file

may cause a sound problem.)

Photos

Image1024.jpg 1024x768

2011/10/24

3/15

E Pause L Previous/Next T Tools R Return

Normal

1. Press the

◄ or ► button to select Photos, then press the

ENTER

E button in the Media Play menu.

2. Press the

◄/►/▲/▼ button to select the desired photo in the file

list.

3. Press the

ENTER

E button or � (Play) button.

✎

NOTE

While a photo list is displayed, press the � (Play) /

ENTER

button on the remote control to start the slide show.

All files in the file list section will be displayed in the slide show.

During the slide show, files are displayed in order.

During the slide show, you can adjust the slide show speed using

(π) (REW) or (µ) (FF) button.

You can move to other file using

◄ or ► button.

Supported Photo Formats

Image

Photo

Resolution

JPEG

Base-line

15360 x 8704

Progressive

1024 x 768

Other Restrictions

CMYK, YCCK Color space JPEG are not supported.

Playing Multiple Files

■

Playing selected video/music/photo files

1. Press the Yellow button in the file list to select the desired file.
2. Repeat the above operation to select multiple files.

✎

NOTE

The c mark appears to the left of the selected files.

To cancel a selection, press the Yellow button again.

To deselect all selected files, press the

TOOLS

button and select

Deselect All.

3. Press the

TOOLS

button, and then select Play Selected

Contents.

■

Playing the video/music/photo file group

1. While a file list is displayed, move to any file in desired group.
2. Press the

TOOLS

button, and then select Play Folder.

Media Play - Additional Functions

■

Videos/Music/Photos Play Option menus

When playing a file, press the

TOOLS

button.