Samsung TXN2734FX-XAA - Manual (Page 32)

O
P E R AT I O N
32
Labeling the Channels
(TXN2734F / TXN2434F / TXN2730F / TXN2726)
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,
“PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter, a
number, “*” or a blank. When the DISPLAY button is pressed, the channel label will
appear next to the channel number.
1
Press the CH or CH
button to tune to the channel
that will be labeled.
2
Press the MENU button to dis-
play the menu, then press the
▼ button to select “Channel”.
Press the √ √ button.
3
Press the ▼ button to select
“Labeling”.
Press the √ √ button to begin
labeling. The left-most field will
be highlighted.
(Each label has four fields.
See top paragraph.)
4
Press the ▲ or ▼ button to
select a letter, a number, “*” or
a blank. (Pressing the
▲ button
results in this sequence:
A,B,...Z,*, blank,0,1,...9).
▼
Note: You cannot select
“Labeling” in the A/V mode.
5
Press the √ √ button to switch to
the next field, which will be
highlighted. Select a second
letter or digit using the
▲ and
▼ buttons, as above. Repeat
the process to select the last
two digits.
Press the MENU button to set the label and clear the menus from
the screen.