Samsung LS22MYLKF-XBM - Manual (Page 6)

button
Push the ' ', then selects the video signal while the OSD is off. (When the ' '
button is pressed to change the input mode, a message appears in the upper left of
the screen displaying the current mode -- analog or digital input signal.)
Note
• If you select the digital mode, you must connect your monitor to the graphic
card's DVI port using the DVI cable.
• This function is not available for products with an Analog interface only.
Enter button [ ]
Activates a highlighted menu item.
AUTO button
Use this button for auto adjustment.
(Available in Analog mode only)
Power button [ ]
Use this button for turning the product on and off.
Power Indicator
This light is lit when operating normally, and blinks once when your adjustments
are saved.
Note
See PowerSaver described in the manual for further information regarding power
saving functions. For energy conservation, turn your monitor OFF when it is not
needed or when leaving it unattended for long periods.
Volume button[ ]
When OSD is not on the screen, push the button to adjust volume.
Note
Applicable to the models that have speakers only.
Headphone sound output terminal[ ]
Note
Applicable to the models that have speakers only.
Speaker
You can hear sound by connecting the soundcard of your PC to the monitor.
Introduction
12